FIRMWARE RELEASE NOTE ====================== Products affected: AXIS A8004-VE Release date: 2024-07-10 Release type: Production Firmware version: 1.65.13 Preceding release: 1.65.12 -------------------------------------------------------------------------------- This is the LTS-2016 track. Upgrade instructions ==================== Upgrade the firmware according to the instructions given at https://www.axis.com/ca/en/support/technical-notes/how-to-upgrade or howtoupgrade.txt, which is included in the firmware folder. NOTE ==================== For latest information about Axis Cybersecurity, see https://www.axis.com/se/sv/support/product-security. Corrections in 1.65.13 since 1.65.12 ======================================= 1.65.13:C01 Updated Apache to version 2.4.58 to increase the overall cybersecurity level. 1.65.13:C02 Multiple SIP improvements. Known Bugs/Limitations ====================== 1.65.13:L1 Due to the updating of OpenSSL to version 1.1.1g to increase overall cybersecurity level. AXIS QR scanner application version 1.9-10 or older used with AXIS Visitor Access will no longer be supported and needs to upgrade to the latest version. Latest available version can be found here: https://www.axis.com/products/axis-visitor-access 1.65.13:L2 It's recommended to factory default the unit before making a downgrade if needed. 1.65.13:L3 When using mp3 files with other samplerates than the native 16kHz performance might suffer and delays be introduced. 1.65.13:L4 As action rules holds copies of recipient information independentally of the Recipient configuration, it is possible to call a SIP recipient using an action rule despite the recipient is removed in the Recipent configuration. To prevent this, one must remove the recipient from the action rule too. 1.65.13:L5 It is not possible to send both RFC2388 and RFC2976 DTMFs through Asterisk at the same time. This limitation can be avoided by using one of RFC 2388 or RFC 2976. It can also be avoided by using Asterisk to transcode into RFC 2976. 1.65.13:L6 Denied access does not show in access log (System Options>Support>Logs and Reports>Access Log) 1.65.13:L7 When the device is facing up or down, tilt tampering detection fuctionality does not work optimally and may generate events often even though the device is not moved or tilted. (The gravity does not effect the two axis normally used for the tilt detection making it sensitive to noise) NOTE ======================== For latest information about Axis Cybersecurity, see: https://www.axis.com/support/product-security Supported AXIS VAPIX API Image Resolutions for AXIS A8004-VE ================================================================================ Resolution Exceptions ========== ========== 1280x960 1280x720 1024x768 1024x640 800x600 800x500 800x450 640x480 640x400 640x360 480x360 480x300 480x270 320x240 320x200 320x180 240x180 176x144 160x120 160x100 160x90 1400x1050 1) 768x576 1) 720x576 1) 704x576 1) 704x480 1) 704x288 1) 704x240 1) 384x288 1) 352x288 1) 352x240 1) 240x135 1) 192x144 1) 176x120 1) 80x50 1) 1) Not visible in web user interface