SOFTWARE RELEASE NOTES ====================== Application: AXIS Direction Detector Release date: 2018-01-26 Release type: Production Software version: 3.12.2 File name: DirectonDetector_3_12_2 Preceding Release: 3.12.1 ------------------------------------------------------------------------------- Contact Information =================== Please contact Axis Communications for product information, updates and support at http://www.axis.com. ------------------------------------------------------------------------------- Compatible products =================== See complete list of compatible products at www.axis.com. New Features in 3.12.2 since 3.12.1 ================================= == * Added calibration for P1244 camera Corrections in 3.12.2 since 3.12.0 ================================ == C01: Fixes wide entrance on cmera models, M3004/5-V, M3014, M3024-LVE M3113/4-R/-VE, M3203/4-V (also when using AVHS). Upload instructions =================== In the supported product's web interface, go to the Applications menu and upload this application package. Start and configure the application. For more instructions see the User Manual at www.axis.com. Dependencies ============ To install and configure AXIS Direction Detector , you must use a supported browser. Known Bugs/Limitations ================================ K01: If the camera is soft anonymized and the camera's firmware is upgraded the anonymization disappears. However the ACAP will still think that it is anonymized. K02: Already installed ACAPs during a hard anonymization might leak images. - Solution: Uninstall all other ACAPs before anonymization, in order to make sure that no images are leaked. K03: After a soft anonymization the rtsp-port on some cameras can still be changed. In such case the rtsp stream will be visible until the next reboot of the camera. K04: Master/slave does not work during hard anonymization since we don't know the password. K05: Master/slave, slave view does not work during soft anonymization. K06: Anonymization is only supported on firmware 5.70 and above. K07: Performing backup/copy with file containing manual height settings does not redirect user - the page remains blank. Application developer information ================================= See User manual for available API www.axis.com/xxxxxx