SOFTWARE RELEASE NOTES

					======================



Application:		AXIS Random Selector



Release date:		2018-01-26



Release type:		Production	      



Software version:	3.12.2	  



File name:		RandomSelector_3_12_2			         

Preceding Release:	3.12.1	 



-------------------------------------------------------------------------------



Contact Information

===================



Please contact Axis Communications for product information, updates and support
at http://www.axis.com.

-------------------------------------------------------------------------------

Compatible products

===================



See complete list of compatible products at www.axis.com.

New Features in 3.12.2 since 3.12.1
=================================
==
* Added calibration for P1244 camera



Corrections in 3.12.2 since 3.12.0
================================
==
C01: Fixes wide entrance on camera models, M3004/5-V, M3014, M3024-LVE M3113/4-R/-VE, M3203/4-V (also when using AVHS).



Upload instructions

===================

In the supported product's web interface, go to the Applications menu and upload 
this application package. Start and configure the application.

For more instructions see the User Manual at www.axis.com.




Dependencies

============

To install and configure AXIS Random Selector, you must use a supported browser.

Known Bugs/Limitations
================================

K01: If the camera is soft anonymized and the camera's firmware is upgraded the anonymization disappears. However the ACAP will still think that it is anonymized.

K02: Already installed ACAPs during a hard anonymization might leak images.
	- Solution: Uninstall all other ACAPs before anonymization, in order to make sure that no images are leaked.
K03: After a soft anonymization the rtsp-port on some cameras can still be changed. In such case the rtsp stream will be visible until the next reboot of the camera.

K04: Master/slave does not work during hard anonymization since we don't know the password.

K05: Master/slave, slave view does not work during soft anonymization.

K06: Anonymization is only supported on firmware 5.70 and above.
K07: Performing backup/copy with file containing manual height settings does not redirect user - the page remains blank.



Application developer information

=================================

See User manual for available API  www.axis.com/xxxxxx