NEW SOFTWARE RELEASE
                   ====================


Products involved:  AXIS Radar Autotracking for PTZ

Release date:       October 3, 2018

Release type:       Production

Software version:   2.0.010

File name:          AxisRadarTrackingForPtzSetup.msi

Supported OS:       Windows 10, Windows 8/8.1, Windows 7,
                    Windows Server 2008, Windows Server 2008 R2,
                    Windows Server 2012.
                    Microsoft .NET version 4.0 Client Profile is required.

Supported Devices:  AXIS D2050-VE Network Radar Detector and selected
                    Q-line cameras with PTZ support. The following cameras
                    models have been explicitly validated:
                    AXIS Q6155
                    AXIS Q6042
                    AXIS Q6045
                    AXIS Q8685
                    AXIS Q8741
                    AXIS Q8742
                    AXIS Q8641
                    AXIS Q8642
                    AXIS Q6035
                    AXIS P5624
                    AXIS P5414

Virus Scanner:      Trend Micro.

Languages:          English

Last preceding
release:            2.0.09


--------------------------------------------------------------------------------

Installation instructions
=========================
- To install AXIS Radar Autotracking for PTZ, run the
  AxisRadarTrackingForPtzSetup.msi file. A license agreement is shown
  during installation.

Removal instructions
====================
- To remove the application use "Programs and Features" from the Control Panel.
  Select "AXIS Radar Autotracking for PTZ" and select "Uninstall".

Contact Information
===================
Please contact Axis Communications for product information, updates and support
at: http://www.axis.com

Known limitations
=================
- Operator PTZ control override, using the Control Queue on camera, is only
  supported for cameras with firmware 7.20 or higher and specific
  service releases)
- It is not possible to use devices that allow anonymous login.
- Unable to perform secure authentication: For security reasons this
  application only allow for Encrypted password types. Make sure your devices
  are set to "Encrypted" or "Encrypted & unencrypted" password type!
- High network latency might impact the tracking performance.

Camera settings modification
=============================
The following changes will be made on PTZ cameras when added in the application:
- PTZ.Various.V1.ProportionalSpeedEnabled=false
- A new user "RadarTracking" is installed (firmware 7.20+)
- PTZ.Various.V1.CtlQueueing=true (firmware 7.20+)
- PTZ.UserCtlQueue.U0.UseCookie=false (firmware 7.20+)
- PTZ.UserCtlQueue.U1.UseCookie=false (firmware 7.20+)
- PTZ.UserCtlQueue.U2.UseCookie=false (firmware 7.20+)

Corrections in 2.0.010
=======================
- Fixed problem with Q8642 added as passive camera.

Corrections in 2.0.09
=======================
- Improved handover when running two radars with one camera.
- Improved control for Q8685

New features in 2.0.07
=======================
- Calibrated tilt speed for Q8685-E and  Q8685-LE.

New features in 2.0.06
=======================
- Optimized PTZ control for AXIS Q6035-E
- Fixed rare crash when restarting service.

New features in 2.0.05
=======================
- Optimized PTZ control for AXIS Q8742-LE

Corrections in 2.0.04
=======================
- Fixed problem using the same camera in several groups when the operator
  override feature was in used.

New features in 2.0.03
=======================
- Improved zoom speed
- Improved camera tilt calibration
- Operator PTZ control override using Control Queue on camera (supported for
  cameras with firmware 7.20 or higher and specific service releases).
- Object classification filter
- Settings window including settings for "Return to Home Delay",
  "Zoom Level", "Video Quality" and "Object Type Filter".
- Optimized PTZ control for AXIS Q6155
- Prevent simultaneous control of one PTZ from two or more radar groups.
- Zoom is now used when setting tilt in camera wizard step 4 ("Tilt calibration").
- Increased maximum camera installation height to 100 meters.
- Added support for new radar CGI paths (supported from firmware 7.15).

Modifications in 2.0.03
=======================
- Enforce strict HTTPS certificate trust policy by default (can be suppressed
  in application settings).

New features in 1.0.80
=======================
- Optimized PTZ control for AXIS Q8685, AXIS Q8741, AXIS Q8742, AXIS Q8641 and
  AXIS Q8642

Corrections in 1.0.70
=======================
- Fixed crash on machines with non-English locale
  
New features in 1.0.60
=======================
- Automatic service recovery is always turned on.
- Global video settings to reduce bandwidth (customizable in settings.xml)
- External settings file
  (%ProgramData%\Axis Communications\AXIS Radar Tracking Service\settings.xml)
- Minor fixes

Corrections in 1.0.60
=======================
- Fixed problem with JPEG streams pulled also when application was minimized
  to tray.
  
Modifications in 1.0.60
=======================
- Never show radar video in video-split.