* AXIS WinPoint (TM) version 1.10
=================================


How to install AXIS WinPoint for Windows 95 and NT 4.0
======================================================

  1. Start Microsoft Windows

  2. Go to the directory where the SETUP.EXE file for WinPoint 
     is located

  3. Run the SETUP.EXE file and follow the instructions on 
     the screen.


AXIS WinPoint
=============
  
  AXIS WinPoint software makes Configuration and Management of Axis Network
  Storage Servers simple and convenient. It runs on Windows 95 and NT 4.0 
  platforms with Microsoft Windows Network or Novell NetWare Network 
  (Client 32). AXIS WinPoint provides you with the following facilities:
  
  * Presentation of AXIS StorPoint units under "My Computer" in the 
    Explorer.
  
  * Possibility to set their IP addresses.
  
  * A Windows tool where you can do all Configuration and Management that 
    can be done via the built in Web support in the StorPoint units.

  * Launch of a Web browser, by clicking on a StorPoint unit, from which
    Management, Configuration and Disc access can be made.

  * Disc access.

    
  Release Description:
  ====================
  
  This is the 1.10 version of AXIS WinPoint.


  Software Requirements
  =====================
  
  AXIS WinPoint can be used with Windows 95 and NT 4.0.
  
  The network support requirements are:
   
  - Microsoft Windows Network (with NetBEUI or TCP/IP) or Novell Netware Network 
    (Client 32 with IPX)
  - TCP/IP protocol for launching a web browser (Not required for the Windows
    configuration tool)

  
  Files required
  ==============
  
  During the installation of AXIS WinPoint the following files will
  be placed in the selected directory:

  TSrvConf.dll
  TSrvConf.hlp
  PropPage.exe
  TSrvInit.exe
  TSrvInit.bin
  TSrvCoAX.ico
  TSuninst.exe
  TSinst.log
  WinConf.exe
  WinConf_x5x_2_10.hlp
  WinConf_x5x_3_01.hlp
  WinConf_x5x_3_06.hlp
  WinConf_3_00.hlp
  WinConf_3_04.hlp
  WinConf_3_06.hlp
  WinConf_4_00.hlp
  WinConf_4_10.hlp

  and the following DLL:s will be placed in the Windows/System directory
  (if not existing already):

  Mfc42.dll
  Msvcrt.dll
  Msvcirt.dll
  
  
  Software limitations
  ====================
  
  1. The following Axis Storage Server software releases are supported:

     - 2.10 and above for Microsoft Windows Network
     - 4.00 and above for Novell Netware Network (Client 32).

  2. Before un-installing or upgrading WinPoint, all Explorer windows should
     be closed.


More Information
================

  If you need more information about AXIS WinPoint or any of the Axis StorPoint     Servers, please visit the Axis WWW Home Page at http://www.axis.com/, or mail 
  your questions to products@axis.com.