FIRMWARE RELEASE NOTE
=====================

Products affected:	Axis Companion Recorder 8CH

Release date:  		2016-08-12

Release type: 		Production

Firmware version: 	1.00.0.2

File name: 	 	ACR_1_00_2.bin

Preceding release: 	1.00.0.1

--------------------------------------------------------------------------------


Upgrade instructions
=====================

Upgrade the firmware with HTTP.
Follow the instructions given in the User Manual, at
http://www.axis.com/support/tecnical-notes/how-to-upgrade,
or howtoupgrade.txt, which is included in the firmware folder.


New Features
============

N/A

Corrections
===========

1.00.0.2:C1
The HDD temperature alarm would trigger at 55 degrees Celcius on the 2 TB
version. This is corrected to 65 degrees Celcius.


Known Bugs/Limitations
======================

1.00.0.2:L1
If a non-supported PoE class 4 device is connected, Axis Companion Recorder
will trigger an alert saying that the port is overloaded. When the device is
then disconnected, this alert is not automatically cleared.
Connecting/disconnecting any other camera clears the alert.

1.00.0.2:L2
It is not possible to connect a self powered PoE class 4 device.

1.00.0.2:L3
Sometimes at startup the LAN port does not get any link. When this happens the
LAN LED stays unlit and the NVR can not be reached via LAN. Restarting the device
solves the problem.

1.00.0.2:L4
WLAN might under some circumstances stop working. Temporarily reducing the load
might solve the problem, otherwise a restart is required.