FIRMWARE RELEASE NOTE
=====================

Products affected:	Axis Companion Recorder 8CH

Release date: 		2016-12-16

Release type: 		Production

Firmware version: 	1.10.0

File name: 	 	ACR_1_10_0.bin

Preceding release: 	1.00.0.3

--------------------------------------------------------------------------------


Upgrade instructions
=====================

Upgrade the firmware with HTTP.
Follow the instructions given in the User Manual, at
http://www.axis.com/support/tecnical-notes/how-to-upgrade,
or howtoupgrade.txt, which is included in the firmware folder.


New Features
============

1.10.0:F1
Enabled IPv6 link local address for Axis Companion Recorder. This enables an
address that regardless of any network configuration will stay the same for
cameras directly connected to the Axis Companion Recorder.

1.10.0:F2
Added support for Axis Video Hosting System (AVHS).

Corrections
===========
1.10.0:C1
Non-PoE devices connected to a PoE port will no longer trigger PoE alerts.

1.10.0.C2
Solved a problem where network shares and files were not deleted after a camera
was removed from the configuration.

1.10.0.C3
Improved discovery of DHCP servers.

1.10.0.C4
Corrected a problem where an alert was not cleared after unplugging an
PoE class 4 device, which is not supported.

1.10.0.C5
Solved a problem where disk quota was not recalculated correctly after removing
cameras from the configuration.

Known Bugs/Limitations
======================

1.10.0:L1
It is not possible to connect a self powered PoE class 4 device.

1.10.0:L2
WLAN might under some circumstances stop working. Temporarily reducing the load
might solve the problem, otherwise a restart is required.

1.10.0:L3
Short circuited devices connected to a PoE port will not be detected as such.
Will show up as "Connected - No PoE".