FIRMWARE RELEASE NOTE
========================

Products affected:        D2110-VE

Release date:             2020-09-24

Release type:             Production

Firmware version:         10.1.0

Preceding release:        10.0.4

--------------------------------------------------------------------------------

Upgrade recommendations
========================

If you need to step up your firmware several steps, it is recommended to do an
intermediate upgrade to LTS-tracks before proceeding.
For example if the current version is 7.40 and you want to upgrade to 9.70.
Then you should do the upgrade in these steps: 7.40 => 8.40 LTS => 9.70.

Upgrade the firmware according to the instructions given in howtoupgrade.txt,
which is included in the firmware folder or at the firmware portal at
https://www.axis.com


NOTE
========================

For latest information about Axis Cybersecurity, see:
https://www.axis.com/support/product-security


New features in 10.1.0
================================================================================

10.1.0:F1
The parameters Time.ServerTime and Time.ServerDate that have been deprecated for
some time are now removed.

10.1.0:F2
Added support for certificate-based client authentication in MQTT.

10.1.0:F3
Added support for Remote Syslog API which enables Axis devices to send their log
messages to a remote syslog server. Remote Syslog can be configured via web-
interface under Settings -> System -> TCP/IP or using the VAPIX API that can be
found here -> https://www.axis.com/vapix-library/.

10.1.0:F4
A factory default is now mandatory when trying to downgrade the device.

10.1.0:F5
Improved performance when building up an RTSP video stream by 30%.

10.1.0:F6
Added support for a new overlay modifier "%v" that displays seconds in 1/1000
fractions.

10.1.0:F7
Added support for HTTP Strict Transport Security (HSTS) when using HTTPS.

10.1.0:F8
The following HTTP headers are now configured per default to increase overall
cybersecurity level :
X-Frame-Options: SAMEORIGIN
X-Content-Type-Options: nosniff
X-XSS-Protection: 1; mode=block.

10.1.0:F9
Updates UPnP to version 1.8.7 which patches CVE-2020-12695 (Callstranger).

10.1.0:F10
Added support for IEEE 802.1x-2010 which provides support for EAPoL version 3.

10.1.0:F11
Changed default IEEE 802.1x EAPoL settting from version 1 to 3.

10.1.0:F12
Added support for configuring 802.1X without CA certificate. This will make the
device authenticate on any network, not just the trusted one.

10.1.0:F13
The EAP-TLS-identity field in the 802.1x configuration is now by default filled
with "axis-<serial-number>" value.

10.1.0:F14
Updated Video Motion Detection to version 4.4.8.

10.1.0:F15
Removed the download.cgi API. The exportrecording.cgi API which was introduced
in 5.60 is the substitute.


Features in 10.0.4
================================================================================


Corrections in 10.1.0
================================================================================

10.1.0:C1
Corrected an issue that caused an FTP Send Image action rule to use the
temporary mode option even if the option was not enabled.

10.1.0:C2
On upgrade to 10.1 the web browser cache needs to be reset or the configuration
page for VMD and/or Guard Suite ACAPs will show up as a blank screen.

10.1.0:C3
Corrected an issue that caused old recordings to not be removed after their
retention period was expired.


Corrections in 10.0.4
================================================================================

10.0.4:C1
Improved false alarm suppression during heavy rains

10.0.4:C2
Corrected an issue that lost radar zone configurations after reboots.

10.0.4:C3
Enabled automatic tilt measurement after calibration

10.0.4:C4
Improved classification performance


Known Bugs/Limitations
================================================================================

10.0.0:L1
Reference map calibration may fail if the uploaded image has a very small or
large scale. If this occurs, retry calibration using an image with a height of
between 50 and 150 meters.

10.0.0:L2
It is not possible to turn off the power LED.


Supported AXIS VAPIX API Image Resolutions for D2110-VE
================================================================================

Resolution    Exceptions
------------  ------------
1920x1080
1280x720
854x480
640x360