FIRMWARE RELEASE NOTE ===================== Products affected: AXIS M3006-V Release date: 2016-07-07 Release type: Production Firmware version: 6.30.1 File name: M3006_6.30.1.bin Preceding release: 5.70.1.4 -------------------------------------------------------------------------------- Upgrade instructions ==================== Upgrade the firmware with AXIS Camera Management, HTTP, or FTP. Follow the instructions given in the User Manual, at http://www.axis.com/support/tecnical-notes/how-to-upgrade, or howtoupgrade.txt, which is included in the firmware folder. New Features in 6.30.1 since 5.70.1.4 ===================================== 6.30.1:F1 If Network Share is setup to use DNS host name as host and if the IP address changes after mount, the host name is resolved to current IP address. 6.30.1:F2 Edge storage recording robustness is improved with an automatic database repair feature. 6.30.1:F3 Improved info in server report from software and hardware PoE detection/negotiation. 6.30.1:F4 Max exposure time parameter is now available in the Camera Settings. It can be used in LPR installations when setting Max exposure time shorter than default Max shutter time. 6.30.1:F5 It is now possible to have recurrence in seconds. 6.30.1:F6 SNMP MIB r/w OID values are saved after reboot. 6.30.1:F7 AXIS Video Motion Detection 3, which includes Axis False Alarm Filtering, is now a pre-installed ACAP application and replaces the built-in Motion Detection in the product Web GUI. The built-in Motion Detection is still available via VAPIX. Axis strongly recommends current users of the Motion Detection API to plan for transfer to the AXIS Video Motion Detection 3 API, please see the VAPIX Library. 6.30.1:F8 Available ONVIF Media Profiles are now presented and configurable using the product Web GUI. 6.30.1:F9 With SD card Encryption it is now possible to enable encryption of the SD card to protect your data. This encryption is transparent to users and VMS solutions making it possible to activate without adaptations. This feature is presented and configurable both in the Web GUI and via VAPIX. 6.30.1:F10 Improved start-up time. 6.30.1:F11 Removed predefined stream profiles: Quality, HDTV, Balanced, Bandwidth, Mobile. 6.30.1:F12 Upgrade OpenSSL to version 1.0.2d. This version also provides support for TLS 1.2. 6.30.1:F13 Support for ONVIF Profile G. Corrections in 6.30.1 since 5.70.1.4 ==================================== 6.30.1:C1 Fixed a critical security vulnerability. 6.30.1:C2 Improved SD card recording handling. 6.30.1:C3 It is possible to set the RTPS timeout in the URL specifying the stream. 6.30.1:C4 Improved handling of frequent I/O triggering. 6.30.1:C5 PullMessages now follow the ONVIF specification 9.1.2. 6.30.1:C6 Possible to use custom stream profile as default in Live View 6.30.1:C7 From the web gui the rule is now triggered on startevent/"signal raise" and not on condition. 6.30.1:C8 Camera is reached through HTTPS when NAT traversal is enabled. 6.30.1:C9 Rectified pulsing of the image in very bright environment. 6.30.1:C10 Improved Privacy mask alignment. 6.30.1:C11 Manual triggers for all enabled View Areas are shown. 6.30.1:C12 Fixed issue with image switching between black & white and color mode. 6.30.1:C13 Corrected H264 payloader behaviour to now insert PPS/SPS frames before every I-frame. This will improve behavior, especially with clients that uses multicast. 6.30.1:C14 Led pulse button can now be turned on in Internet Explorer. 6.30.1:C15 Corrected image corruption issue seen in corridor format. 6.30.1:C16 Fixed script error when naming a privacy mask with åäö. 6.30.1:C17 Added ACAP support for NV12 format. 6.30.1:C18 Improved performance in MOTE and ACAP’s when converting from UYVY to GRAY8(Y800). 6.30.1:C19 If the total bandwidth received from the camera is greater than 90 Mbps all streams might not get an equal share of the network cards maximum throughput. 6.30.1:C20 Fixed issues with stopped events for manual triggered recording. 6.30.1:C21 Date format now displayed correctly in ACM. 6.30.1:C22 Corrected issue with drifting over/under exposed images Known Bugs/Limitations ====================== 6.30.1:L1 The status LED is unlit during the boot-up sequence and then goes steady green when system is ready. 6.30.1:L2 RTSP over TCP may cause choppy video if block size is not optimized or set during video connection. 6.30.1:L3 Recording streams to SD card with a total bit rate above 12Mbit/sec may cause missing frames/sequences. 6.30.1:L4 Text modifiers #x #y #z #Z #L do not work for upload file/folder names, TCP/HTTP notification text or e-mail subject/message. 6.30.1:L5 When downgrading to an older firmware, the root password might be changed back to its default password. 6.30.1:L6 Capture mode change might require a camera restart to get full FoV. 6.30.1:L7 Using identical start and stop time for a scheduled event will never trigger an event. 6.30.1:L8 Some special UTF-8 characters can not be used for privacy mask names. Supported AXIS VAPIX API Image Resolutions for AXIS M3006-V =========================================================== Resolution Exceptions ========== ========== 2048x1536 3) 1920x1080 3) 4) 1600x1200 3) 5) 1280x1024 1280x960 1280x720 1024x768 800x600 800x450 640x480 640x360 480x360 480x270 320x240 320x180 240x180 176x144 160x120 160x90 768x576 1) 704x576 1) 704x480 1) 704x288 1) 704x240 1) 384x288 1) 352x288 1) 352x240 1) 240x135 1) 192x144 1) 176x120 1) 1) Not visible in web user interface 2) Available for Overview view 3) 3 MP 2048x1536 (4:3) @ 20/16 fps 4) HDTV 1080p 1920x1080 (16:9) @ 30/25 fps 5) 2 MP 1600x1200 (4:3) @ 30/25 fps