FIRMWARE RELEASE NOTES ====================== Products affected: AXIS M3007 Release date: 2015-11-20 Release type: Production Firmware version: 5.75.1.1 File name: M3007_5_75_1_1.bin Preceding release: 5.75.1 AMC version: 7.1.2.2 Onvif support: Profile S -------------------------------------------------------------------------------- Upgrade instructions ==================== The firmware can be upgraded using Axis Camera Management, HTTP or FTP. Please follow the instructions from the user's manual, the web page at http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named howtoupgrade.txt. Corrections in 5.75.1.1 since 5.75.1 ==================================== 5.75.1.1:C01 Fixed the issue with missing part of image on Panorama mode in wallmount. 5.75.1.1:C02 Double panorama corner will not show blind spot now. 5.75.1.1:C03 Fixed MJPEG over RTP issue for big resolutions. 5.75.1.1:C04 Removed some error messages in log after upgrade, 5.70 -> 5.75 5.75.1.1:C05 Fixed an issue where ACC and IPUtility couldn't find M3007 after changing http port number. 5.75.1.1:C06 Improved performance in Analytic ACAPs. 5.75.1.1:C07 Addes missing information in debug.tgz 5.75.1.1:C08 Updated help text about #D modifiers which are intended only for text overlay. 5.75.1.1:C09 Fixed and issue with switching image between black and white and then color modes. Known Bugs/Limitations ====================== 5.75.1.1:L01 Corner sources available on Action Rule Setup in wall mount. 5.75.1.1:L02 Recorded Tours is missing in Help File. 5.75.1.1:L03 Nothing happens in Preview when enable/disable overview border mask. 5.75.1.1:L04 Direction section in Video Stream Settings Help missing for Double/Panorama Corner. 5.75.1.1:L05 Failed to start httpd (Apache) after downgrade to 5.70 final. Downgrading from 5.75.1.1 to releases older than 5.75.1 will not work properly due to a bug in the older firmware versions. In this case the firmware needs to be reflashed by logging in over ftp and running the below command. put flash_all 5.75.1.1:L06 Recording streams to SD Card with a total bit rate above 12Mbit/sec may cause missing frames/sequences. 5.75.1.1:L07 90 and 270 rotation can cause a drop in frame rate. 5.75.1.1:L08 To avoid corrupt recordings, it is recommended to unmount the SD Card before ejecting it. 5.75.1.1:L09 SNMP OID that have been set are not kept after reboot. 5.75.1.1:L10 Video motion detection will detect objects hidden behind privacy masks. 5.75.1.1:L11 Pan limits set using VAPIX are not reflected using ONVIF. 5.75.1.1:L12 Using special characters § œ ! £ \ ” @ [ ] ’ $ € {}& * ? ^š~+ =Ž ` < > | , ; : in the upload folder name will not work as expected. 5.75.1.1:L13 It's not possible to set the RTPS timeout in the URL specifying the stream. The default value of 120 seconds will always be used. APPLICATION DEVELOPER Information ================================= The AXIS VAPIX Application Programming Interface version 3 is supported by this product. For more information please refer to the AXIS VAPIX HTTP API specification version 3 part of the AXIS VAPIX API available at www.axis.com. Supported AXIS VAPIX API Image Resolutions for AXIS M3007 ========================================================= Resolution Exceptions ========== ========== 2592x1944 2) 2048x1536 2) 1920x1440 4) 5) 6) 1920x1080 6) 1600x1200 2) 4) 5) 6) 1920x720 3) 1280x960 2) 4) 5) 6) 1600x600 3) 1280x720 6) 1024x768 2) 4) 5) 6) 1280x480 3) 800x600 2) 4) 5) 6) 800x450 6) 960x360 3) 640x480 2) 4) 5) 6) 640x360 6) 480x360 2) 4) 5) 6) 640x240 3) 480x270 6) 480x180 3) 320x240 2) 4) 5) 6) 320x180 6) 240x180 2) 4) 5) 6) 320x120 3) 160x120 2) 4) 5) 6) 160x90 6) 2560x1920 1) 2) 768x576 1) 2) 4) 5) 6) 768x288 1) 3) 384x288 1) 2) 4) 5) 6) 384x144 1) 3) 240x135 1) 6) 192x144 1) 2) 4) 5) 6) 192x72 1) 3) 1) Not visible in web user interface 2) Available for Overview view 3) Available for Panorama view 4) Available for Double Panorama view 5) Available for Quad view 6) Available for View area