FIRMWARE RELEASE NOTE ===================== Products affected: AXIS M3058-PLVE Release date: 2018-03-20 Release type: Production Firmware version: 7.45.1.2 File name: M3058-PLVE_7.45.1.2.bin Preceding release: 7.45.1.1 -------------------------------------------------------------------------------- Upgrade instructions ==================== Upgrade the firmware according to the instructions given at https://www.axis.com/ca/en/support/tecnical-notes/how-to-upgrade or howtoupgrade.txt, which is included in the firmware folder. Corrections in 7.45.1.2 since 7.45.1.1 ====================================== 7.45.1.2:C1 Corrected critical vulnerability ACV-128401. 7.45.1.2:C2 Removed "Corridor" in the list of available trigger sources. 7.45.1.2:C3 Added IR Illumination in the actions list. 7.45.1.2:C4 Allow PTZ into the edge of image (a factory default reset is needed to make this change applied). 7.45.1.2:C5 Adjusted default Corridor view in Wall Mount. Known Bugs/Limitations ====================== 7.45.1.1:L1 Maximum size for overlay image is 1920x1080. 7.45.1.1:L2 Higher resolution than 2048x2048 not working on Firefox 57.x in Windows. 7.45.1.1:L3 Cover assembly should be mounted during firmware upgrade 7.45.1.1:L4 Login prompts two times on Edge 41 7.45.1.1:L5 Action Rule Type list fails to load when Supervised IO is turned on. 7.45.1.1:L6 IR illumination turns off when scene is changed from a bright environment to an even brighter one when manually activated through the web interface. 7.45.1.1:L7 Recording streams to SD Card with total bit rate above 12Mbit/sec may cause missing frames/sequences. 7.45.1.1:L8 Overlay images or overlay text are not included in the video stream when streaming over HDMI. 7.45.1.1:L9 Videos recorded using the video capture feature in live view may not be playable or might get stuck in some media players. This was seen e.g. with Windows Media Player. 7.45.1.1:L10 Connecting to a camera will fail and result in "Unauthorized" message due to an bug in Microsoft Edge 40 browser. This will be corrected by Microsoft in the next version of Edge 41. 7.45.1.1:L11 The VAPIX API will always return the state of a IO-port as "input" even if it is configured as "output". 7.45.1.1:L12 When downgrading a firmware the static IP configuration is lost. Axis recommends to perform a factory reset after downgrading. Supported AXIS VAPIX API Image Resolutions for AXIS M3058-PLVE ============================================================== Resolution Exceptions Capture mode ========== ========== ============ 3584x2688 3) 8) 2992x2992 1) 8) 9) 2880x2880 1) 6) 8) 9) 3584x2016 3) 8) 3200x1600 5) 8) 2560x1920 3) 6) 7) 8) 3584x1344 2) 8) 2432x1824 3) 6) 7) 8) 2048x2048 1) 6) 8) 9) 2304x1728 3) 6) 7) 8) 3200x1200 5) 8) 2560x1440 3) 7) 8) 1920x1920 1) 6) 8) 9) 3584x1008 2) 8) 2048x1536 3) 4) 6) 7) 8) 2304x1296 3) 4) 7) 8) 1728x1728 1) 6) 8) 9) 2400x1200 5) 8) 1920x1440 3) 4) 6) 7) 8) 2560x960 2) 5) 8) 2048x1152 3) 4) 7) 8) 1728x1296 3) 4) 6) 7) 8) 1920x1080 4) 8) 1440x1440 1) 6) 8) 9) 2304x864 2) 5) 8) 1600x1200 3) 4) 6) 7) 8) 2560x720 2) 8) 1280x1280 1) 8) 9) 2304x648 2) 8) 1200x1200 1) 8) 9) 1920x720 2) 5) 8) 2048x576 2) 8) 1728x648 2) 5) 8) 1600x600 2) 5) 8) 1280x720 3) 4) 7) 8) 1024x768 3) 4) 6) 7) 8) 960x720 3) 4) 6) 7) 8) 800x800 1) 8) 9) 1280x480 2) 5) 8) 1024x576 3) 4) 7) 8) 720x720 1) 8) 9) 1280x360 2) 8) 768x576 3) 4) 6) 7) 8) 640x640 1) 6) 8) 9) 960x360 2) 5) 8) 640x480 3) 4) 6) 7) 8) 480x480 1) 6) 8) 9) 768x288 2) 5) 8) 640x240 2) 5) 8) 384x288 3) 4) 6) 7) 8) 320x320 1) 8) 9) 320x240 3) 4) 6) 7) 8) 240x240 1) 8) 9) 384x144 2) 5) 8) 320x120 2) 5) 8) 256x144 3) 4) 7) 8) 160x160 1) 8) 9) 192x72 2) 5) 8) 1) Available for Overview 2) Available for Panorama 3) Available for Double Panorama, Quad view 4) Available for View area 1-4 5) Available for Panorama Corner Left/Right 6) Available for Double Panorama Corner 7) Available for Corridor 8) 360° overview @ 15/12.5 fps dewarped views WDR 9) 360° overview only @ 30/25 fps no WDR 20 fps with WDR