FIRMWARE RELEASE NOTE ====================== Products affected: AXIS M3058-PLVE Release date: 2018-07-30 Release type: Production Firmware version: 8.30.1.2 Preceding release: 8.30.1.1 -------------------------------------------------------------------------------- Upgrade instructions ==================== Upgrade the firmware according to the instructions given at https://www.axis.com/ca/en/support/tecnical-notes/how-to-upgrade or howtoupgrade.txt, which is included in the firmware folder. NOTE ==================== For latest information about Axis Cybersecurity, see https://www.axis.com/se/sv/support/product-security. Corrections in 8.30.1.2 since 8.30.1.1 ======================================= 8.30.1.2:C01 Corrected an issue that caused the web-interface to show either none or wrong information about the network share status after mounting a share in Settings -> System -> Storage. Previously the user needed to refresh the browser page via F5 in order to get the correct information shown. 8.30.1.2:C02 Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working after a firmware upgrade. 8.30.1.2:C03 Corrected an issue in the ACAP framework that caused installed ACAPs to become unresponsive on rare occasions and the Apps tab to not be shown correctly. New features in 8.30.1.1 ================================================================================ 8.30.1.1:F1 Added support for selecting HDMI as Action type in Action rules. 8.30.1.1:F2 Added the possibility for the user to share anonymous usage data with AXIS developers. 8.30.1.1:F3 Added support for negotiating the preferred SMB protocol version of 2.10, 3.0 or 3.02 to increase overall minimum cybersecurity level. To use an older SMB version, go to Plain config -> Storage and add "vers=x.y" (e.g vers=1.0) to the Extra mount options field. 8.30.1.1:F4 Updated OpenEmbedded to version Poky Rocko to increase overall cyber security level. 8.30.1.1:F5 Updated the maximum number of recipients for action rules to 20 from 10. 8.30.1.1:F6 Changed the default setting of SRTP to disabled in order to reduce the number of ports opened by default. 8.30.1.1:F7 AXIS Video Motion Detection 4.2.4 is now pre-installed. 8.30.1.1:F8 Added support for AES-XTS-512 256-bit SD card encryption. 8.30.1.1:F9 Prepared support for signed firmware to increase overall cyber security level. It is planned that the product will only accept AXIS security-signed firmware starting in Q1/Q2 2019 and onwards. Corrections in 8.30.1.1 ================================================================================ 8.30.1.1:C1 Corrected an issue that could display wrong possible maximum FPS in Settings -> Image. 8.30.1.1:C2 Corrected an issue that could cause the camera to get stuck in night mode when WDR setting changed. 8.30.1.1:C3 Corrected an issue that could cause the HDMI output to show incorrect view area. 8.30.1.1:C4 Corrected an issue that let the I/O API respond with an incorrect port number. 8.30.1.1:C5 Corrected an issue that let the camera become unresponsive on rare occasions. 8.30.1.1:C6 Corrected an issue that caused the camera to become unresponsive on rare occasions when running ACAPs without specified ApplicationId. 8.30.1.1:C7 Increased user awareness when converting legacy overlays to dynamic overlays. A restart of ongoing recordings is required after overlay conversion. 8.30.1.1:C8 Corrected an issue with the Axis event handling interface when deactivating events. 8.30.1.1:C9 Updated OpenSSL to version 1.0.2o to increase overall minimum cyber security level. Known Bugs/Limitations ================================================================================ 8.30.1.2:L1 When using the Edge or Firefox web browser automatic license installation doesn't work as expected. 8.30.1.2:L2 Some parts of the web-interface may not be fully translated. 8.30.1.2:L3 It is not possible to update the product using Genetec 5.7 SR2. Genetec will provide a patch in 5.7 SR3. Supported AXIS VAPIX API Image Resolutions for AXIS M3058-PLVE ============================================================== Resolution Exceptions Capture mode ========== ========== ============ 3584x2688 3) 8) 2992x2992 1) 8) 9) 2880x2880 1) 6) 8) 9) 3584x2016 3) 8) 3200x1600 5) 8) 2560x1920 3) 6) 7) 8) 3584x1344 2) 8) 2432x1824 3) 6) 7) 8) 2048x2048 1) 6) 8) 9) 2304x1728 3) 6) 7) 8) 3200x1200 5) 8) 2560x1440 3) 7) 8) 1920x1920 1) 6) 8) 9) 3584x1008 2) 8) 2048x1536 3) 4) 6) 7) 8) 2304x1296 3) 4) 7) 8) 1728x1728 1) 6) 8) 9) 2400x1200 5) 8) 1920x1440 3) 4) 6) 7) 8) 2560x960 2) 5) 8) 2048x1152 3) 4) 7) 8) 1728x1296 3) 4) 6) 7) 8) 1920x1080 4) 8) 1440x1440 1) 6) 8) 9) 2304x864 2) 5) 8) 1600x1200 3) 4) 6) 7) 8) 2560x720 2) 8) 1280x1280 1) 8) 9) 2304x648 2) 8) 1200x1200 1) 8) 9) 1920x720 2) 5) 8) 2048x576 2) 8) 1728x648 2) 5) 8) 1600x600 2) 5) 8) 1280x720 3) 4) 7) 8) 1024x768 3) 4) 6) 7) 8) 960x720 3) 4) 6) 7) 8) 800x800 1) 8) 9) 1280x480 2) 5) 8) 1024x576 3) 4) 7) 8) 720x720 1) 8) 9) 1280x360 2) 8) 768x576 3) 4) 6) 7) 8) 640x640 1) 6) 8) 9) 960x360 2) 5) 8) 640x480 3) 4) 6) 7) 8) 480x480 1) 6) 8) 9) 768x288 2) 5) 8) 640x240 2) 5) 8) 384x288 3) 4) 6) 7) 8) 320x320 1) 8) 9) 320x240 3) 4) 6) 7) 8) 240x240 1) 8) 9) 384x144 2) 5) 8) 320x120 2) 5) 8) 256x144 3) 4) 7) 8) 160x160 1) 8) 9) 192x72 2) 5) 8) 1) Available for Overview 2) Available for Panorama 3) Available for Double Panorama, Quad view 4) Available for View area 1-4 5) Available for Panorama Corner Left/Right 6) Available for Double Panorama Corner 7) Available for Corridor 8) 360° overview @ 15/12.5 fps dewarped views WDR 9) 360° overview only @ 30/25 fps no WDR 20 fps with WDR