FIRMWARE RELEASE NOTE ===================== Products affected: M3057-PLVE/M3058-PLVE Release date: 2020-03-09 Release type: Production Firmware version: 9.70.1 Preceding release: 9.60.1.1 -------------------------------------------------------------------------------- Upgrade instructions ==================== Upgrade the firmware according to the instructions given at https://www.axis.com/ca/en/support/tecnical-notes/how-to-upgrade or howtoupgrade.txt, which is included in the firmware folder. New features in 9.70.1 ================================================================================ 9.70.1:F1 Added support for resolve domain name trap addresses in SNMP. 9.70.1:F2 SEI (Supplemental enhancement information) messages is since 9.60.1 included in recorded H.264 videos. Features in 9.60.1.1 ================================================================================ 9.60.1:F1 Added possibility to select stream profile for continuous recordings. 9.60.1:F2 Added possibility to set image rotation in ONVIF media profiles. 9.60.1:F3 Added Geolocation API. See VAPIX documentation for more information. 9.60.1:F4 Added possibility to copy action rules, schedules and recipients. 9.60.1:F5 Updated Video Motion Detection to version 4.4.3. 9.60.1:F6 Added NTP synchronization status to VAPIX Time API. 9.50.1:F1 Added support for Session Initiation Protocol (SIP). 9.50.1:F2 Added support for setting image frequency in action rules. 9.50.1:F3 Added possibility to reposition the individual videos in quad view mode. 9.50.1:F4 Updated Apache to version 2.4.41 to increase overall minimum cyber security level. 9.50.1:F5 Updated OpenSSL to version 1.1.1d to increase overall minimum cyber security level. 9.50.1:F6 Updated Video Motion Detection to version 4.4.2. 9.50.1:F7 Added possibility to disable the web UI to increase overall minimum cyber security level. The web UI can be disabled under System -> PlainConfig -> System -> System Web Interface Disabled. To enable the web UI after it has been disabled, the VAPIX parameter System.WebInterfaceDisabled must be set to "no". 9.40.1:F1 Added support for search functionality in help files. 9.40.1:F2 Added support for systemready.cgi which will improve re-connection of the browser to the web-interface after e.g. powercyle or restart of the product. 9.40.1:F3 Added support for average bitrate control (ABR). 9.40.1:F4 Added support for automatic firmware rollback verfication. The user can chose to select this option prior to performing an firmware upgrade. When chosen, the product will perform the upgrade and then wait a pre-defined time for the user to acknowledge the upgrade in the web-interface. If not acknowledged in time, the product will rollback to its previous firmware. 9.40.1:F5 Added support for the possibility to configure a secondary NTP server in web- interface under Settings -> System -> Date & Time or via VAPIX Time API. 9.40.1:F6 Removed the root users default password in factory defaulted firmware. The password of the root user must be set first in order to initialize VAPIX and ONVIF interfaces to allow further configuration. This change only affects products in its factory defaulted state, products that are already deployed in production systems are not affected by this update until factory defaulted. For more information please see https://www.axis.com/support/faq/FAQ116429. 9.40.1:F7 Added support for uploading custom firmware certificates in the web-interface under Settings -> System -> Security in order to allow the Axis product to accept AXIS developer firmware during firmware upgrade. 9.40.1:F8 Added support for millisecond timestamps in JPEG header. 9.30.1:F1 Added an API for mDNS-SD. 9.30.1:F2 TLS1.0 and TLS1.1 is now disabled by default. 9.30.1:F3 Added support for source-specific multicast (SSM) via http://ip-address/axis- media/ssm/media.amp. The following parameters need to be configured prior to initiating a video stream via SSM: Network.RTP.R#.VideoAddress Network.RTP.R#.VideoPort Network.RTP.R#.AudioAdress Network.RTP.R#.AudioPort 9.30.1:F4 Added support for TLSv1.3. 9.30.1:F5 The classic GUI has been deprecated and is now removed to increase overall cyber security level. 9.30.1:F6 Upgraded Apache to version 2.4.39 to increase overall minimum cyber security level. 9.30.1:F7 Updated Video Motion Detection to version 4.3.5. 9.30.1:F8 It is now possible to upload .PFX formatted certificates with a total size of 102400 bytes. The previous limit was 1/10 of it. 9.30.1:F9 Added support for "Wait at least time x" before re-running an configured action rule. 9.20.1:F1 Firmware is now signed by AXIS to increase overall minimum cybersecurity level. More information about Signed Firmware can be found here https://www.axis.com/support/faq/FAQ116424. 9.20.1:F2 Added support for dynamic power allocation via Link Layer Discovery Protocol (LLDP) in addition to PoE-class based power allocation. This allows the switch to allocate less power to the camera and potentially a greater number of PoE devices can be connected to the switch. LLDP can be enabled in Settings -> System -> PlainConfig -> Network -> LLDP POE -> LLDP Send Max PoE. 9.20.1:F3 Upgraded Apache to version 2.4.38 to increase overall minimum cyber security level. 9.20.1:F4 Updated Video Motion Detection to version 4.3.4. 9.20.1:F5 Added support for signed ACAP applications. 9.20.1:F6 Updated OpenSSL to version 1.1.1a to increase overall minimum cyber security level. 9.10.1:F1 The following legacy VAPIX parameter have been removed due to non-usage: Network.DHCP.Fqdn Network.DHCP.IPCheckEnabled Network.DHCP.Retries Network.DHCP.StoreIPAddresseth0 Network.DHCP.StoreIPAddresseth1 Network.DHCP.Timeout 9.10.1:F2 Added support for additional view Quad + Overview. 9.10.1:F3 Updated Video Motion Detection to version 4.3.3. 9.10.1:F4 Upgraded Apache to version 2.4.37 to increase overall minimum cyber security level. 9.10.1:F5 Firwmare Recovery will also rollback the previous state of applications (ACAPs) now. Corrections in 9.70.1 ================================================================================ 9.70.1:C1 Improved video streaming robustness in unstable network environments. 9.70.1:C2 Corrected a streaming issue that caused the RTSP server to omit the RTP-info header on rare occasions. This correction was already included in 9.60 but was missed in the release notes. 9.70.1:C3 Improved cyber security by adding the possibility to disable Web-Service Discovery (WS-Discovery). 9.70.1:C4 Corrected an issue that caused the EAP-START package not to be sent during IEEE 802.1x port authentication upon network link state change. 9.70.1:C5 Corrected an issue that removed information about recipients in the server report. 9.70.1:C6 Corrected a streaming issue affecting RTSP tunneled via HTTPs. 9.70.1:C7 Corrected an issue with streaming H.264 using Axis T8705 with User Data enabled. 9.70.1:C8 Corrected Vendor class identifier for DHCP negotiation. Corrections in 9.60.1.1 ================================================================================ 9.60.1.1:C1 Corrected an issue that prevented use of rotation on other than the first view area. 9.60.1:C1 Corrected an issue that caused the HTTP recipient URL to be cropped. 9.60.1:C2 Corrected the following security vulnerabilities: CVE-2019-13377 CVE-2019-16275 9.50.1:C1 Improved Tampering Detection. 9.50.1:C2 Corrected an issue that could cause the web-interface to freeze upon action rule configuration with Fence Guard. 9.50.1:C3 Improved recording robustness in the event of temporary storage loss. 9.50.1:C4 Increased the limit of concurrent HTTP requests for I/O related VAPIX commands from 4 to 10. 9.50.1:C5 Corrected an issue that caused the stream to be mirrored on the y-axis instead of the x-axis when 90 or 270 degree rotation was configured. 9.50.1:C6 The deprecated parameter HTTPS.AllowSSLV3 has been removed completely now. 9.40.1:C1 Removed a unecessary warning text for a user when setting up a action rule that requires a stream profile while it is actually already in place. 9.40.1:C2 Corrected an issue that made it possible to add a action rule recipient without nice-name via API. 9.30.1.2:C1 Corrected an issue that caused the IR lights to not turn on. 9.30.1:C1 Corrected an issue that makes the text overlay visible in any resolution If the text overlay is placed in the upper right, lower left or lower right corner. 9.30.1:C2 Corrected an issue that prevented the user from exporting recordings when the camera was configured to Alaska timezone. 9.30.1:C3 Corrected an issue that prevented the user to play recordings as a viewer. 9.30.1:C4 Extended the charater limits for query string suffix in action rules in order to allow for longer URLs. 9.20.1:C1 Corrected an issue that could cause the camera to get unresponsive when two clients are streaming over multicast using the same streaming parameters. 9.10.1:C1 Corrected an issues that could cause an incorrect error message when testing HTTP recipient. 9.10.1:C2 Increased the character limit for certificate IDs from 32 to 128 characters. 9.10.1:C3 Corrected an issue that caused RTSP client timeout to be delayed. 9.10.1:C4 Corrected an issue that caused an HTTP-recipient based action rule to fail when the response from the server excluded the textual phrase (Example: HTTP 200). This will work now. 9.10.1:C5 Corrected an issue that caused the temperature information delivered via SNMP OID to be corrupted. Known Bugs/Limitations ================================================================================ 9.70.1:L1 It is not possible to upgrade the product from 9.60 to any other release while having SOCKS proxy configured in the product. 9.40.1:L1 There might be event settings available that is not applicable to the product with the current setup. 9.40.1:L2 If the product is disconnected while the T61xx is running, the T61xx needs to be restarted before the product is re-connected. 9.30.1:L1 There might be features currently explained in the help files that may not be supported by the camera. 9.10.1:L1 It is recommended to perform firmware recovery to rollback the products firmware to a previous version. Downgrading the products firmware through the usual firmware upgrade process can cause configuration and ACAP loss. It is recommended to perform a factory default afterwards. 9.10.1:L2 Parts of the privacy mask may become invisible in rare occasions during configuration. If this happens, please try to modify the mask slightly. 9.10.1:L3 If using any of following analytics VMD/CLD/DAT/Guard Suite (Motion, Fence & Loitering) together with view areas and digital PTZ, the detection is offset and therefore will give an inaccurate detection. 9.10.1:L4 It is recommended to stop any ongoing continuous recordings before upgrading the firmware. Otherwise, the recorded view might get corrupted. If that happens, please stop and restart the recording again. Supported AXIS VAPIX API Image Resolutions for M3057-PLVE/M3058-PLVE ================================================================================ Resolution Exceptions ========== ========== 3584x2688 4) 5) 8) 10) 2992x2992 2) 8) 10) 2880x2880 2) 8) 10) 3584x2016 4) 5) 8) 10) 3072x2304 4) 5) 11) 3072x1728 4) 5) 11) 2304x2304 2) 11) 3200x1600 8) 10) 2560x1920 3584x1344 3) 8) 10) 3072x1536 11) 2432x1824 2048x2048 2) 2304x1728 3200x1200 8) 10) 2560x1440 1920x1920 2) 3584x1008 3) 8) 10) 3072x1152 3) 11) 2048x1536 2304x1296 1728x1728 2) 2400x1200 8) 10) 11) 2368x1184 7) 9) 1920x1440 3072x864 3) 11) 2560x960 3) 2048x1152 1728x1296 1920x1080 1440x1440 2) 2304x864 1600x1200 2560x720 3) 1280x1280 2) 2304x648 3) 7) 8) 9) 10) 1200x1200 2) 7) 8) 9) 10) 1184x1184 2) 11) 1920x720 1792x672 11) 2048x576 3) 1728x648 3) 7) 8) 9) 10) 1600x600 3) 7) 8) 9) 10) 1280x720 1536x576 3) 11) 1024x768 960x720 800x800 2) 1280x480 1024x576 736x736 2) 11) 720x720 2) 7) 8) 9) 10) 1280x360 3) 7) 8) 9) 10) 768x576 640x640 2) 1024x384 3) 11) 960x360 3) 7) 8) 9) 10) 640x480 1024x288 3) 11) 480x480 2) 768x288 640x240 384x288 320x320 2) 320x240 256x256 2) 11) 240x240 2) 7) 8) 9) 10) 384x144 320x120 3) 7) 8) 9) 10) 256x144 160x160 2) 192x72 3) 7) 8) 9) 10) 2992x2992 1) 11) 1024x768 1) 7) 8) 9) 10) 1) Not visible in web user interface 2) Available for Overview view 3) Available for Panorama view 4) Available for Double Panorama view 5) Available for Quad view 6) Available for View area 7) 360° overview @ 30/25 fps dewarped views WDR 8) 360° overview @ 15/12.5 fps dewarped views WDR 9) 360° overview only @ 60/50 fps no WDR 10) 360° overview only @ 30/25 fps no WDR 20 fps with WDR 11) 360° overview max 5 MP @ 20 fps dewarped views WDR