FIRMWARE RELEASE NOTE 
=====================

Products affected: 	AXIS P3214-V/-VE and AXIS P3215-V/-VE

Release date: 		2016-02-22

Release type: 		Production

Firmware version:  	6.10.1

File name:         	P3214_6_10_1.bin

Preceding release: 	5.80.1.2

--------------------------------------------------------------------------------

Upgrade instructions
=====================

Upgrade the firmware with AXIS Camera Management, HTTP, or FTP.
Follow the instructions given in the User Manual, at 
http://www.axis.com/support/tecnical-notes/how-to-upgrade, 
or howtoupgrade.txt, which is included in the firmware folder.

NOTE! In case that upgrade to 6.10.1 firmware fails, upgrade the camera first to 
5.80.1.2 firmware and then to 6.10.1.


New features
============

6.10.1:F1
Edge storage recording robustness is improved with an automatic database repair 
feature. 

6.10.1:F2
SNMP MIB r/w OID values are saved after reboot. 

6.10.1:F3
Improved start-up time. 

6.10.1:F4
Removed predefined stream profiles: Quality, HDTV, Balanced, Bandwidth, Mobile. 

6.10.1:F5
Upgrade OpenSSL to version 1.0.2d. This version also provides support for TLS 
1.2. 

6.10.1:F6
The API Event Handling 1.10 is being removed from this release. If events 
have been previously added with this api, they need to be converted using the 
convert button in the Action Rules web page _before_ upgrading to 6.10. 
Failing to do this will result in all event configurations being lost. 

6.10.1:F7
Max exposure time parameter is now available in the Camera Settings. It can be 
used in LPR installations when setting Max exposure time shorter than default 
Max shutter time. 


Corrections
============

6.10.1:C1
It is now possible to a select starting point when playing back a recording 
while using multicast and H.264. 

6.10.1:C2
When DST is enabled, export recordings can now be done via web interface. 

6.10.1:C3
PullMessages now follow the ONVIF specification 9.1.2. 

6.10.1:C4
Rule is now triggered on start event/signal raise and not on condition. 

6.10.1:C5
Users with admin permissions can edit ACAP configuration settings. 

6.10.1:C6
Improved Privacy mask alignment. 

6.10.1:C7
Manual triggers for all enabled View Areas are shown. 

6.10.1:C8
Corrected H264 payloader behaviour to now insert PPS/SPS frames before every 
I-frame. This will improve behaviour, especially with Genetec clients that uses 
multicast. 


Known Bugs/Limitations
============

6.10.1:L1
Recording streams to SD card with a total bit rate above 12Mbit/sec may cause 
missing frames/sequences. 

6.10.1:L2
In case you have upgrade issues make sure you are upgrading from latest 
available service release. For more information see FAQ "Upgrade issues to 
6.10".

6.10.1:L3
Every time you start a continuous recording, to a sd card or network share,
a warning about the storage being locked appear. Even though it's not locked.
Recording starts when OK is pressed. 


Resolution Exceptions
========== ===========

1920x1080 	1)
1400x1050	2)3)
1280x960	
1280x800	
1280x720
1024x768
800x600
800x450
640x480
640x360
480x360
480x270
320x240
320x180
240x180
176x144
160x120
160x100		1)
160x90
768x576		2)
720x576		2)
704x576		2)
704x480		2)
704x288		2)
704x240		2)
384x288		2)
352x288		2)
352x240		2)
240x135		2)
192x144		2)
176x120		2)

1) Only available in P3215
2) Not visible in web user interface
3) Only available in P3214