FIRMWARE RELEASE NOTE ====================== Products affected: Q1659 Release date: 2019-03-14 Release type: Production Firmware version: 8.40.1.2 Preceding release: 8.40.1.1 -------------------------------------------------------------------------------- Upgrade instructions ==================== Upgrade the firmware according to the instructions given at https://www.axis.com/ca/en/support/tecnical-notes/how-to-upgrade or howtoupgrade.txt, which is included in the firmware folder. NOTE ==================== For latest information about Axis Cybersecurity, see https://www.axis.com/se/sv/support/product-security. Corrections in 8.40.1.2 since 8.40.1.1 ======================================= 8.40.1.2:C01 General minor improvements to the 8.40 LTS platform. 8.40.1.2:C02 Corrected an issue in the web GUI when creating a preset position and the language was set to German. 8.40.1.2:C03 Corrected an issue that could cause the camera to get unresponsive when two clients are streaming over multicast using the same streaming parameters. 8.40.1.2:C04 Upgraded Apache to version 2.4.38 to increase overall minimum cyber security level. 8.40.1.2:C05 Corrected an issue with Always Multicast over IPv6. 8.40.1.2:C06 Corrected an issue that caused factory default settings to not be applied correctly when upgrading from a firmware version prior to 6.20. 8.40.1.2:C07 Corrected an issue in the web GUI that caused IO Port values to be displayed incorrectly. 8.40.1.2:C08 Corrected an issue that caused Recorded Guard Tour not to work properly on rare occasions. 8.40.1.2:C09 Improved re-connection behavior to AVHS server. The time between failed connection attempts will now gradually increase until a hard limit is reached. 8.40.1.2:C10 Corrected an issue that could cause corrupted overlays when using BMP images as overlay. 8.40.1.2:C11 Corrected an issue that prevented usage of the same port for two different multicast streams. 8.40.1.2:C12 Corrected an issue that could cause foggy snapshot images on rare occasions. 8.40.1.2:C13 Corrected an issue when cropping a streamed image with the VAPIX parameter croppos. 8.40.1.2:C14 Improved list.cgi to display all installed applications (no longer limited to 8). 8.40.1.2:C15 Corrected an issue with pre-installed applications using startmode set to "never". 8.40.1.2:C16 Corrected an issue that could cause an incorrect error message when testing HTTP recipient. 8.40.1.2:C17 Corrected an issue that could cause corrupted video recordings when UserData or TriggerData are enabled. 8.40.1.2:C18 Improved stability in the httptest.cgi. 8.40.1.2:C19 Corrected an issue that caused an HTTP-recipient based action rule to fail when the response from the server excluded the textual phrase (Example: HTTP 200). This will work now. 8.40.1.2:C20 Added Firmware Recovery (Firmware Rollback) information to the server report. Corrections in 8.40.1.1 since 8.40.1 ===================================== 8.40.1.1:C01 Corrected an issue that produced corrupted JPEG file data while the image itself was good. 8.40.1.1:C02 Disabled the Energy-Efficient Ethernet mode that caused network connection issues on rare occasions. 8.40.1.1:C03 Corrected an issue that prevented the user from uploading a certificate that contains "Bag Attributes" before and after the actual certificate content. 8.40.1.1:C04 Corrected an issue that prevented the user from receiving the correct recording list in AXIS Companion in combination with view areas or multi-sensor products. 8.40.1.1:C05 Corrected an issue in the ACAP framework that could cause ACAPs to freeze on rare occasions. 8.40.1.1:C06 Patched the following security vulnerabilities to increase overall minimum cyber security level: CVE-2018-10876, CVE-2018-10877, CVE-2018-10878, CVE-2018-10879, CVE-2018-10880, CVE-2018-10881, CVE-2018-10882, CVE-2018-10883. 8.40.1.1:C07 Updated to OpenSSL version 1.0.2p to increase overall minimum cyber security level. 8.40.1.1:C08 Updated Apache to version 2.4.35 to increase overall minimum cyber security level. 8.40.1.1:C09 Patched security vulernability CVE-2018-17182 to increase overall minimum cyber security level. 8.40.1.1:C10 Corrected an issue that caused upload of Axis People Counter via curl to fail in rare occations. 8.40.1.1:C11 Corrected an issue that could cause incorrect snapshot resolutions on view areas. New features in 8.40.1 ================================================================================ 8.40.1:F1 Renamed "Browser Stream Statistics" to "Client Stream Information". The Client Stream Information are available in the web-interface of the camera. 8.40.1:F2 Updated apache webserver to version 2.4.33 to increase overall minimum cyber security level. 8.40.1:F3 AXIS Video Motion Detection 4.2.5 is now pre-installed. 8.40.1:F4 AXIS Motion Guard and Fence Guard 2.1.4 are now pre-installed. 8.40.1:F5 Updated help files with more detailed information about SMB and Certificate support in AXIS products. 8.40.1:F6 Added a new section "Snapshot of current CPU utilization" that prints information about CPU utilization and memory consumption of processes in the server report. 8.40.1:F7 Changed the default timeout of HTTP-Recipient based action rules from 10s to 120s to compensate for unstable networks or slow clients. After the timeout is reached, the action rule will be re-tried. Corrections in 8.40.1 ================================================================================ 8.40.1:C1 Corrected an issue with incorrect handling of ACAPs after camera boot. 8.40.1:C2 Corrected an issue that prevented the user from formatting SD cards and the web- interface to show incorrect information about network share status in Settings -> System -> Storage. 8.40.1:C3 Added selection boxes for disabling TLSv1.0 and TLSv1.1 in Settings -> System -> PlainConfig -> HTTPS to enforce the highest possible TLS version for HTTPS-based connections. 8.40.1:C4 Corrected an issue that could cause a network share to become read-only. 8.40.1:C5 Corrected an issue that prevented the overlay to show the correct state of inputs when toggling. 8.40.1:C6 Corrected an issue in the ACAP framework that caused installed ACAPs to become unresponsive and the Apps tab not to be shown correctly. 8.40.1:C7 Corrected an issue that let the network share test under Events -> Recipient fail when a NAS was connected that only supports SMB 1.0 or SMB 2.0. 8.40.1:C8 Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working after a firmware upgrade. 8.40.1:C9 Corrected an issue that caused the certificate signing request not to have an LF (alt. CR-LF) every 64th character causing the certificate considered not being valid e.g. when using symantec certificates. 8.40.1:C10 Corrected an issue that prevented the user from creating a Recipient when a "-" sign was present in the host name. 8.40.1:C11 Corrected an issue that could cause the configuration file upload from ADM to camera to fail. 8.40.1:C12 Corrected an issue that prevented the user to export recordings in the desired time range. 8.40.1:C13 Patched security vulnerability CVE-2018-5390 to increase overall minimum cyber security level. 8.40.1:C14 Patched security vulernability CVE-2018-14526 to increase overall minimum cyber security level. Known Bugs/Limitations ================================================================================ 8.40.1.2:L1 It is recommend to refresh the browser with F5 after doing a FW upgrade from FW 6.xx to 8.xx or higher in order to show all the new settings in the web- interface. Supported AXIS VAPIX API Image Resolutions for Q1659 ================================================================================ Resolution Exceptions ========== ========== 5472x3648 2) 4080x2720 2) 3840x2880 4) 3840x2160 3) 3264x2176 2) 2560x1920 4) 2560x1440 3) 1920x1080 1600x1200 4) 1632x1088 2) 1280x960 4) 1280x720 3) 1152x768 2) 1024x768 3) 4) 960x640 2) 800x600 3) 4) 854x480 3) 720x480 2) 640x480 3) 4) 640x360 3) 480x360 3) 4) 480x320 2) 320x240 3) 4) 1280x720 1) 4) 768x576 1) 4) 800x450 1) 672x448 1) 2) 640x360 1) 4) 480x270 1) 3) 384x288 1) 4) 176x144 1) 2) 3) 160x90 1) 3) 96x64 1) 80x60 1) 4) 1) Not visible in web user interface 2) 20MP 5472x3648 @ 8fps 3) 4K 3840x2160 @ 25fps 4) 11MP 3840x2880 @ 15fps