FIRMWARE RELEASE NOTES
                        ======================

Products affected: AXIS Q6000-E and AXIS Q6000-E Mk II

Release date:      2017-04-19

Release type:      Production

Firmware version:  6.50.1.1

File name:         Q6000-E_6_50_1_1.bin

Preceding release: 6.50.1

--------------------------------------------------------------------------------

UPGRADE INSTRUCTIONS
====================

The firmware can be upgraded using Axis Camera Management, HTTP or FTP.
Please follow the instructions from the user's manual, the web page at
http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named
howtoupgrade.txt.


Corrections in 6.50.1.1 since 6.50.1
====================================

6.50.1.1:C01
Improved stability for TCP notifications.

6.50.1.1:C02
Improved HTTP image upload stability in unstable networks.

6.50.1.1:C03
Improved camera stability when metadata is used.

6.50.1.1:C04
Optimized privacy mask positioning.

6.50.1.1:C05
Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3.

6.50.1.1:C06
Improved camera stability when TriggerData is used.

6.50.1.1:C07
Improved loading of the web interface in unstable networks.

6.50.1.1:C08
Corrected a bug that prevented from saving an action rule with a mail recipient
that had SSL enabled.

6.50.1.1:C09
Fixed a bug that let HTTP notification action rules stop retrying from
contacting the receiving server after a failed attempt.

6.50.1.1:C10
Corrected a bug in the event system that prevented the camera from re-sending
the SMTP notification every 10 seconds in case the receiving server reported an
error.

6.50.1.1:C11
Enable solo mode.


Known Bugs/Limitations
======================

6.50.1.1:L1
It's recommended to factory default the unit before making a downgrade if
needed.

6.50.1.1:L2
Recording streams to SD card with a total bit rate above 12Mbit/sec may cause
missing frames/sequences.

6.50.1.1:L3
When changing an active https-certificate, the product needs to be restarted for
the new certificate to be applied.

6.50.1.1:L4
Text overlays with video data in each stream will not be correct in quad view

6.50.1.1:L5
Setting a fixed shutter time on a channel to a high value, for instance 2s, the
other streams in the quad channel are limited by this setting regardless what
they are set to.

6.50.1.1:L6
Area of interest is not shown during reconfiguring of detectors created when the
camera was configured with a different video rotation setting.


Supported AXIS VAPIX API Image Resolutions for AXIS Q6000-E and AXIS Q6000-E Mk II
==================================================================================

Resolution  Exceptions
==========  ==========

1920x1440   2)
1920x1080
1440x1080
1280x960
1280x720
960x720
800x600
800x450
640x480
480x270

1600x1200   1) 2)
1280x1024   1)
1024x768    1)
1024x640    1)
768x576     1)
720x576     1)
854x480     1)
704x576     1)
800x500     1)
704x480     1)
640x400     1)
640x360     1)
704x288     1)
480x360     1)
704x240     1)
480x300     1)
384x288     1)
352x288     1)
352x240     1)
320x240     1)
320x200     1)
240x180     1)
240x135     1)
192x144     1)
176x144     1)
176x120     1)
160x120     1)
160x100     1)
160x90      1)
80x50       1)

1) Not visible in web user interface
2) Available on Quad channel