FIRMWARE RELEASE NOTE ====================== Products affected: Q6010-E Release date: 2020-12-18 Release type: Production Firmware version: 9.80.3 Preceding release: 9.80.2.4 -------------------------------------------------------------------------------- This is the LTS-2020 track. Upgrade recommendations ======================== If you need to step up your firmware several steps, it is recommended to do an intermediate upgrade to LTS-tracks before proceeding. For example if the current version is 7.40 and you want to upgrade to 9.80. Then you should do the upgrade in these steps: 7.40 => 8.40 LTS => 9.80. Upgrade the firmware according to the instructions given in howtoupgrade.txt, which is included in the firmware folder or at the firmware portal at https://www.axis.com NOTE ======================== For latest information about Axis Cybersecurity, see: https://www.axis.com/support/product-security Corrections in 9.80.3 since 9.80.2.4 ===================================== 9.80.3:C01 General improvements to the LTS-2020 platform. 9.80.3:C02 Corrected an issue that sometimes could make it impossible to export the full length of recordings. 9.80.3:C03 Corrected an issue in oak.cgi that could cause invalid requests. 9.80.3:C04 Update OpenSSL to version 1.1.1h to increase overall cyber security level. 9.80.3:C05 Corrected an issue that caused PKCS#12-formatted certificate uploads to fail when certain special characters were used as a password. 9.80.3:C06 Updated IANA Time Zone Database to version 2020d to get the latest Time Zone updates. 9.80.3:C07 Corrected an issue in the Web GUI that caused an error message when using a client certificate with '>' character in it's ID for HTTPS access. 9.80.3:C08 Corrected an issue that caused the value of Quality of Service (QoS) to not be respected in always multicast mode. Corrections in 9.80.2.4 since 9.80.2.3 ======================================= 9.80.2.4:C01 General improvements to the LTS-2020 platform. 9.80.2.4:C02 Corrected an issue that caused the device to stop video streaming over multicast after receiving multiple RTSP PLAY requests with "npt=0.000-" payload. 9.80.2.4:C03 Added support for HTTP Strict Transport Security (HSTS) when using HTTPS. Corrections in 9.80.2.3 since 9.80.2.2 ======================================= 9.80.2.3:C01 General improvements to the LTS-2020 platform. 9.80.2.3:C02 Reduced time to built-up an RTSP video stream by 30% and more. 9.80.2.3:C03 Corrected an issue in FTP Send Image Action Rule that caused disabling of "Use Temporary File" checkbox to be ignored. 9.80.2.3:C04 Reduced time for the web interface to load. 9.80.2.3:C05 Updated Apache to version 2.4.46 to increase overall cyber security level. 9.80.2.3:C06 Corrected an issue that caused incorrect requests to be sent when testing passive mode FTP recipients. 9.80.2.3:C07 Corrected an issue that caused an error message to pop-up when pressing the test button of an event using HTTP recipients. 9.80.2.3:C08 The following HTTP headers are now configured per default to increase overall cybersecurity level: X-Frame-Options: SAMEORIGIN X-Content-Type-Options: nosniff X-XSS-Protection: 1; mode=block. Corrections in 9.80.2.2 since 9.80.2 ===================================== 9.80.2.2:C01 General improvements to the LTS 2020 platform. 9.80.2.2:C02 Corrected an issue in setcleanupmaxage.cgi that caused changed settings not to be applied directly. 9.80.2.2:C03 Corrected an issue that caused old recordings to not be removed after their retention period was expired. 9.80.2.2:C04 Corrected an issue that sometimes caused event triggered recordings to fail. 9.80.2.2:C05 Corrected an issue causing LLDP negotiation with 30W LLDP capable vendor switches to fail on rare occasions. 9.80.2.2:C06 Updated Curl to version 7.69.1 to increase overall cybersecurity level. 9.80.2.2:C07 Corrected an issue that made Digital PTZ malfunction in combination with auto rotation. Corrections in 9.80.2 since 9.80.1.1 ===================================== 9.80.2:C01 General improvements to the LTS 2020 platform. 9.80.2:C02 Corrected an issue in the MQTT Client that caused selected QoS not to be used when publishing events. 9.80.2:C03 Corrected an issue in the MQTT Client that caused source fields not to be sent. 9.80.2:C04 Updated Apache to version 2.4.43 to increase overall cyber security level. 9.80.2:C05 Update OpenSSL to version 1.1.1g to increase overall cyber security level. 9.80.2:C06 Added possibility to retrieve the device Owner Authentication Key (OAK) in the web GUI. Note that this functionality requires that the product have direct access to the internet. 9.80.2:C07 Corrected an issue that sometimes made it impossible to edit action rules after upgrade. Corrections in 9.80.1.1 ================================================================================ 9.80.1.1:C1 When Axis Live Privacy Shield i enabled, it is only possible to upgrade to 9.80.1.1 if you are using version 1.2.1 or newer. If an older version of Axis Live Privacy Shield is used, that must be updated before the firmware is upgraded. Known Bugs/Limitations ================================================================================ 9.80.1:L1 On full-screen the controls, + and – cannot zoom in/out the PTZ camera view. Supported AXIS VAPIX API Image Resolutions for Q6010-E ================================================================================ Resolution Exceptions ------------ ------------ 2592x1944 1920x1080 1280x720 640x360 1280x960 1) 1024x768 1) 1024x640 1) 1024x576 1) 800x600 1) 800x450 1) 768x576 1) 720x576 1) 704x576 1) 704x480 1) 704x288 1) 704x240 1) 640x480 1) 640x400 1) 480x360 1) 480x270 1) 384x288 1) 352x288 1) 352x240 1) 320x240 1) 1) Not visible in web user interface