FIRMWARE RELEASE NOTE
======================

Products affected: Q6075-S / Q6075-SE

Release date:      2020-12-18

Release type:      Production

Firmware version:  9.80.3

Preceding release: 9.80.2.4

--------------------------------------------------------------------------------

This is the LTS-2020 track.

Upgrade recommendations
========================

If you need to step up your firmware several steps, it is recommended to do an
intermediate upgrade to LTS-tracks before proceeding.
For example if the current version is 7.40 and you want to upgrade to 9.80.
Then you should do the upgrade in these steps: 7.40 => 8.40 LTS => 9.80.

Upgrade the firmware according to the instructions given in howtoupgrade.txt,
which is included in the firmware folder or at the firmware portal at
https://www.axis.com


NOTE
========================

For latest information about Axis Cybersecurity, see:
https://www.axis.com/support/product-security


Corrections in 9.80.3 since 9.80.2.4
=====================================

9.80.3:C01
General improvements to the LTS-2020 platform.

9.80.3:C02
Corrected an issue that sometimes could make it impossible to export the full length of
recordings.

9.80.3:C03
Corrected an issue that sometimes prevented adjustment of the focus window.

9.80.3:C04
Corrected an issue in oak.cgi that could cause invalid requests.

9.80.3:C05
Update OpenSSL to version 1.1.1h to increase overall cyber security level.

9.80.3:C06
Corrected an issue that prevented the device to utilize the available network bandwidth in
high-latency networks such as 4G cellular network.

9.80.3:C07
Corrected an issue that caused PKCS#12-formatted certificate uploads to fail when certain
special characters were used as a password.

9.80.3:C08
Corrected an issue that caused parallel HTTPS CGI requests to fail on rare occasions.

9.80.3:C09
Corrected an issue with pause-frame handling that could cause network disconnections if
pause-frames were enabled and used in the network.

9.80.3:C10
Updated IANA Time Zone Database to  version 2020d to get the latest Time Zone updates.

9.80.3:C11
Corrected an issue in the Web GUI that caused an error message when using a client
certificate with '>' character in it's ID for HTTPS access.

9.80.3:C12
Corrected an issue that caused the value of Quality of Service (QoS) to not be respected
in always multicast mode.


Corrections in 9.80.2.4 since 9.80.2.3
=======================================

9.80.2.4:C01
General improvements to the LTS-2020 platform.

9.80.2.4:C02
Corrected an issue that caused the device to stop video streaming over multicast after
receiving multiple RTSP PLAY requests with "npt=0.000-" payload.

9.80.2.4:C03
Added support for HTTP Strict Transport Security (HSTS) when using HTTPS.


Corrections in 9.80.2.3 since 9.80.2.2
=======================================

9.80.2.3:C01
General improvements to the LTS-2020 platform.

9.80.2.3:C02
Reduced time to built-up an RTSP video stream by 30% and more.

9.80.2.3:C03
Corrected an issue in FTP Send Image Action Rule that caused disabling of "Use Temporary
File" checkbox to be ignored.

9.80.2.3:C04
Reduced time for the web interface to load.

9.80.2.3:C05
Updated Apache to version 2.4.46 to increase overall cyber security level.

9.80.2.3:C06
Corrected an issue that caused incorrect requests to be sent when testing passive mode FTP
recipients.

9.80.2.3:C07
Corrected an issue that caused an error message to pop-up when pressing the test button of
an event using HTTP recipients.

9.80.2.3:C08
The following HTTP headers are now configured per default to increase overall
cybersecurity level: 
X-Frame-Options: SAMEORIGIN 
X-Content-Type-Options: nosniff
X-XSS-Protection: 1; mode=block.


Corrections in 9.80.2
================================================================================

9.70.1.5:C1
Improved system stability.


Known Bugs/Limitations
================================================================================

9.70.1:L1
When using a VMD 4 event in combination with a connected preset, a refresh of
the VMD 4 configuration page after a camera restart is needed for the event to
work.


Supported AXIS VAPIX API Image Resolutions for Q6075-S / Q6075-SE
================================================================================

Resolution    Exceptions
------------  ------------
1920x1080
1280x720
800x450
480x270
320x180

1280x960      1)
1024x768      1)
1024x576      1)
800x600       1)
768x576       1)
720x576       1)
704x576       1)
704x480       1)
704x288       1)
704x240       1)
640x480       1)
640x360       1)
480x360       1)
384x288       1)
352x288       1)
352x240       1)
320x240       1)
240x180       1)
192x144       1)
176x144       1)
176x120       1)
160x120       1)
160x90        1)
analyze       1)


1) Not visible in web user interface