FIRMWARE RELEASE NOTE
=====================

Products affected:        AXIS Q6115-E

Release date:             2016-10-07

Release type:             Production

Firmware version:         6.40.1

File name:                Q6115-E_6.40.1.bin

Preceding release:        6.20.1.3

--------------------------------------------------------------------------------

Upgrade instructions
====================

Upgrade the firmware with AXIS Camera Management, HTTP, or FTP.
Follow the instructions given in the User Manual, at
http://www.axis.com/support/tecnical-notes/how-to-upgrade,
or howtoupgrade.txt, which is included in the firmware folder.


New features in 6.40.1 since 6.20.1.3
=====================================

6.40.1:F1
If Network Share is setup to use DNS host name as host and if the IP address
changes after mount, the host name is resolved to current IP address.

6.40.1:F2
Added support for ONVIF standardised I/O events.

6.40.1:F3
Adjustable zoom speed can now be enabled/disabled in PTZ Advanced settings. Only
applicable for products with various zoom speeds.

6.40.1:F4
Added a new parameter "AutoFocusSensitivity" in ImageSource I0 Sensor. Products
autofocus sensitivity can be adjusted to either Low/Medium/High/Very High.

6.40.1:F5
Enhanced Recovery is now available as feature in Camera Settings offering
Highlights Recovery or Shadows Recovery. Highlights Recovery improves the image
appearance by decreasing brightness to the bright parts of the image whereas
Shadows Recovery improves the image appearance by increasing brightness to the
dark parts of the image.

6.40.1:F6
Corrected behavior for conditional triggers.

6.40.1:F7
Improved Axis Zipstream technology for PTZ cameras.

6.40.1:F8
Improved handling for networks with small MTU values.

6.40.1:F9
Improved Zipstream using dynamic frame rate.

6.40.1:F10
Improved motion and object tracking engine.

6.40.1:F11
Support for ONVIF Profile G.


Corrections in 6.40.1 since 6.20.1.3
====================================

6.40.1:C1
Improved performance when triggerdata enabled in plain config and when no motion
windows have been created.

6.40.1:C2
Fixed script error when naming a privacy mask with åäö.

6.40.1:C3
Improved pan/tilt control and stability.

6.40.1:C4
Corrected possibility to include SPS (Sequence Parameter Set) and PPS (Picture
Parameter Set) in the stream according to ACAP documentation.

6.40.1:C5
Fixed issues with that Guard Tours are running but are shown as a "undefined"
state.

6.40.1:C6
Fixed security vulnerability CVE-2015-7547

6.40.1:C7
Fixed issues with stopped events for manual triggered recording.

6.40.1:C8
Date format now displayed correctly in ACM.

6.40.1:C9
Improved focus stability


Known Bugs/Limitations
======================

6.40.1:L1
Mechanical PTZ Auto Tracking looses immediately its position in control queue
after the tracked object disappeared from cameras view range.

6.40.1:L2
Recording streams to SD card with a total bit rate above 12Mbit/sec may cause
missing frames/sequences.

6.40.1:L3
WDR and Defogging cannot be used simultaneously.

6.40.1:L4
Video stream during PTZ calibration process and RemoteGatekeeper configuration
is not available when HTTPS with self-signed certificate is enabled and IE11 is
used. It is recommended to use another browser, add the ip-address of the camera
to the secure white list and reload the webpage.


Supported AXIS VAPIX API Image Resolutions for AXIS Q6115-E
===========================================================

Resolution  Exceptions
==========  ==========

1920x1080
1280x720
800x450
480x270
320x180

1280x960    1)
1024x768    1)
1024x576    1)
800x600     1)
768x576     1)
720x576     1)
704x576     1)
704x480     1)
640x480     1)
640x360     1)
704x288     1)
480x360     1)
704x240     1)
384x288     1)
352x288     1)
352x240     1)
320x240     1)
240x180     1)
192x144     1)
176x144     1)
176x120     1)
160x120     1)
160x90      1)
analyze     1)

1) Not visible in web user interface