FIRMWARE RELEASE NOTES ====================== Products affected: AXIS A1001 Release date: 2016-06-20 Release type: Production Firmware version: 1.35.0.1 File name: A1001_1_35_0_1.bin Preceding release: 1.35.0 AMC version: None ------------------------------------------------------------------------------ UPGRADE INSTRUCTIONS ==================== The firmware can be upgraded using Axis Camera Management, HTTP or FTP. Please follow the instructions from the user's manual, the web page at http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named howtoupgrade.txt. New Features ============ 1.35.0:F01 Faster HTTPS experience. 1.35.0:F02 Alternate Access time in AEM. Doors in AEM can now be configured with an alternate access time for selected card holders. 1.35.0:F03 Credential bitcount in idpoint event. If an unknown size of credential is presented the number of bits are now reported in the idpoint event. 1.35.0:F04 Support for AVHS users. Specific AVHS users are now exempt from distribution in a controller cluster. 1.35.0:F05 Aperio v3. Aperio support for direct command of wireless locks (LOCK, UNLOCK, ACCESS) as well as scheduled unlock. 1.35.0:F06 Facility code validation in AEM. You can now pre-configure your system's facility code and validate access requests based on facility code input (Facility code, Facility code + pin). 1.35.0:F07 HTTP Digest. HTTP Digest authentication as default. HTTP Basic can be configured as well. Corrections in 1.35.0.1 since 1.35.0 ===================================== 1.35.0.1:C1 Fixed a critical security vulnerability. Known Bugs/Limitations ====================== 1.35.0:L01 It's possible to set faulty IP addresses as proxy under AVHS settings. 1.35.0:L02 When trying to connect to a proxy server using digest autentication, the connection fails with a 407 error. 1.35.0:L03 In Action Rule Setup, the text box for Additional conditions is out of the frame when using Explorer 10. 1.35.0:L04 When removing a group with a large amount of credentials being members of it, the deletion may sometimes fail and needs to be repeated. 1.35.0:L05 After a firmware update, the web browser cache may need to be cleared to avoid seeing pages originating from the old firmware. 1.35.0:L06 Specifying an IdPoint timeout value (waiting for PIN to be entered) greater than 10 seconds has no effect. 1.35.0:L07 On the Action Rule Setup page, the Help button misses descriptions for some of the available event logger options. 1.35.0:L08 The action rule help page misses descriptions for some sub triggers. 1.35.0:L09 If a LockDownDoor operation is performed towards a door that is unlocked, a subsequent LockDownReleaseDoor will not return the door to unlocked, but to locked. 1.35.0:L10 When using the API to add credentials with eg. CardRaw fields, where a hexadecimal representation of card data is used, it is important that lower case letters are used. 1.35.0:L11 Under Event Log, the controller column can sometimes be empty. 1.35.0:L12 The "Overview" link under Setup > Additional Controller Configuration is not translated. 1.35.0:L13 Contrary to what is stated under Setup > Additional Controller Configuration > Help > Languages, it is not possible to install additional languages. 1.35.0:L14 Additional AccessDoor requests while a door is in Accessed state will not use the supplied AccessTime (if specified), but instead use the default access time of the door configuration. 1.35.0:L15 An unnecessary lock transition (unlocked>locked>unlocked), can be noticed if performing an access request while the door is manually unlocked. 1.35.0:L16 Changing the Time Zone will not work from ACS and ACM. 1.35.0:L17 After a firmware upgrade, the web browser cache must be cleared in order to render the new features of AEM correctly. 1.35.0:L18 It is not possible to create action rules with schedules, other than "Always (No Schedule)", when in a controller cluster. 1.35.0:L19 During start up of the device the web server is reachable earlier than in previous FW, before other sub-systems are operational, possibly resulting in AEM showing 'Failed to retrieve device info' on its overview page if accessed during this time. Reloading the page a few seconds later will resolve this issue. 1.35.0:L20 When Global Events is enabled, then action rules with additional conditions do not work and action rules with the schedule set to something other than Always will not work. 1.35.0:L21 The Long Access Time will not be shown in the Users report. 1.35.0:L22 If a hardware configuration import is done with a JSON file that contains errors, then the configuration might end up in a bad state. A factory default reset will solve this. 1.35.0:L23 If you have offline controllers in a controller cluster and try to remove one of the units that is online this requires a majority of all controllers being online excluding the controller being removed. 1.35.0:L24 If a door is placed in the state LockDown, a valid access will be shown in the event log as "Access Granted" even though the Access request was not approved. The door will not unlock. 1.35.0:L25 If changing the Bonjour 'Friendly Name' found under Setup>Additional Controller Configuration>System Options>Network>Bonjour, the device might not be able to join a system with other A1001 devices. 1.35.0:L26 If a controller is set on manual time and initiates a controller cluster the first units time will be changed to the other units time but the manual time configuration will be kept. 1.35.0:L27 Using the controllers API setting up a recurring rule without a counter or end date does not work. 1.35.0:L28 Some translations to FIGS has been missed, such as idetification types "Facility Code Only" and "Facility Code and PIN" 1.35.0:L29 To change the recipient of an Action Rule, please click the "Modify..." button and change there. The drop-down in the Action Rule lists currently does not work.