PTZ DRIVER RELEASE NOTES
                 ========================

Release date: 2008-11-17

Release type: Production

Firmware version: 3.03

Filename: Pelco-3.03-crisv32-3_0-1_5.ptz

Previous release: 2.02

---------------------------------------------------------------------

Release 3.03:
=============

3.03:1 Added new DeviceTypes, "Spectra IV" and "Spectra Mini".

3.03:2 Added support for Backlight Compensation when using a Pelco
       "Spectra IV" model.


Known problems and limitations in version 3.03
==============================================

Note! Some limitations are also device type dependent and can behave
      different on different Pelco devices!

3.03:3 To use this version of the driver, firmware 5.11 is required.

3.03:4 With auto-focus set off, after a pan, tilt or zoom movement,
       the auto-focus will be activated.

3.03:5 With auto-iris set off and zoom wide, after a pan or tilt movement,
       the auto-iris will be activated.

3.03:6 With auto-iris set on and the iris manual changed,
       after a zoom movement, the iris is not changed.
       With auto-iris set on and zoom tele and the iris manual changed,
       after a pan or tilt movement, the iris is not changed.


Known problems and limitations with Pelco Spectra III.
======================================================
3.03:7 Pan, tilt and zoom positions may sometimes be displayed in the picture.

3.03:8 To enable auto-iris, a 15 degrees pan or tilt movement is required.
======================================================