PTZ DRIVER RELEASE NOTES
                 ========================

Release date: 2008-11-17

Release type: Production

Firmware version: 3.00

Filename: Eneo-F2-3.00.ptz

Previous release:  None

---------------------------------------------------------------------

Release 3.00:
=============
This is the first production release.


Known problems and limitations in version 3.00
===========================================================
Note! Some limitations are also device type dependent and can behave
      different on different Eneo devices!

3.00:1 To use this version of the driver, firmware 5.01 or higher
       is required.

3.00:2 The driver can have only one of zoom, focus and iris movements
       running at the same time.

3.00:3 The driver have no "autofocus" and "autoiris" functions.

3.00:4 After a pan, tilt or zoom movement, the "autofocus" function
       will be activated in the PTZ unit.

3.00:5 After a pan or tilt movement (but not after a zoom move),
       the "autoiris" function will be activated in the PTZ unit.

3.00:6 Information about "DOMEID" and pan and tilt positions may be
       included in the the picture.

===========================================================