SOFTWARE RELEASE NOTES ====================== Application: AXIS Random Selector Release date: 2017-08-11 Release type: Production Software version: 3.12.0 File name: RandomSelector_3_12_0 Preceding Release: 3.10.2 ------------------------------------------------------------------------------- Contact Information =================== Please contact Axis Communications for product information, updates and support at http://www.axis.com. ------------------------------------------------------------------------------- Compatible products =================== See complete list of compatible products at www.axis.com. New Features in 3.12.0 since 3.10.2 ================================= * Added support for M3047-P camera. Steps below must be followed during the installation of the ACAP on the M3047-P camera. - Select capture mode ”Dewarp 16:9 25/30fps” - Enter System->Orientation and select ”View Areas 1&2” under dewarped view - Install application - Go to PTZ tab and select ”View Area 1” in the live view - Use PTZ to enter the correct position/rotation - Save as ”home” by pressing the ”set” icon under ”Preset Positions” - When the PTZ is set, restart the app ”Maintenance->Restart Service” * Added Korean translation. Corrections in 3.12.0 since 3.10.2 ================================ C01: Fixed anonymization. C02: Updated Chinese and Japanese translation. C03: Chrome no longer blocks the connection in Master/Slave? live view. Upload instructions =================== In the supported product's web interface, go to the Applications menu and upload this application package. Start and configure the application. For more instructions see the User Manual at www.axis.com. Dependencies ============ To install and configure AXIS Random Selector, you must use a supported browser. Known Bugs/Limitations ================================ K01: If the camera is soft anonymized and the camera's firmware is upgraded the anonymization disappears. However the ACAP will still think that it is anonymized. K02: Already installed ACAPs during a hard anonymization might leak images. - Solution: Uninstall all other ACAPs before anonymization, in order to make sure that there are no image leaks. K03: After a soft anonymization the rtsp-port on some cameras can still be changed. In such case the rtsp stream will be visible until the next reboot of the camera. K04: Master/slave does not work during hard anonymization since we don't know the password. K05: Master/slave, slave view does not work during soft anonymization. K06: Anonymization is only supported on firmware 5.70 and above. Application developer information ================================= See User manual for available API www.axis.com/xxxxxx