FIRMWARE RELEASE NOTE
======================

Products affected: M1124/-E/M1125/-E

Release date:      2018-07-30

Release type:      Production

Firmware version:  8.30.1.1

Preceding release: 8.30.1

--------------------------------------------------------------------------------

Upgrade instructions
====================

Upgrade the firmware according to the instructions given at
https://www.axis.com/ca/en/support/tecnical-notes/how-to-upgrade 
or howtoupgrade.txt, which is included in the firmware folder.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 8.30.1.1 since 8.30.1
=====================================

8.30.1.1:C01
Corrected an issue that caused the web-interface to show either none or wrong information
about the network share status after mounting a share in Settings -> System -> Storage.
Previously the user needed to refresh the browser page via F5 in order to get the correct
information shown.

8.30.1.1:C02
Corrected an issue that caused AXIS Perimeter Defender or SafeZoneEdge to stop working
after a firmware upgrade.

8.30.1.1:C03
Corrected an issue in the ACAP framework that caused installed ACAPs to become
unresponsive on rare occasions and the Apps tab to not be shown correctly.


New features in 8.30.1
================================================================================

8.30.1:F1
Added the possibility for the user to share anonymous usage data with AXIS
developers.

8.30.1:F2
Added support for automatically negotiating the preferred SMB protocol version
with SMB 2.1 or higher in order to increase the overall minimum cybersecurity
level. Please refer to the follwing FAQ for more information ->
https://www.axis.com/support/faq/FAQ116392.

In case SMB 1.0 or SMB 2.0 is required due to compatibility issues, we recommend
setting the Extra Mount Options in PlainConfig -> Storage to a specific
version"vers=x.y" (e.g vers=1.0 or vers=2.0). Please note that there are two
Storage groups that are related to a mounted network share (normally Storage S1
and Storage S2) and both of them need to have the correct version in Extra Mount
Options.

8.30.1:F3
Updated OpenEmbedded to version Poky Rocko to increase overall cyber security
level.

8.30.1:F4
Updated the maximum number of recipients for action rules to 20 from 10.

8.30.1:F5
Changed the default setting of SRTP to disabled in order to reduce the number of
ports opened by default.

8.30.1:F6
AXIS Video Motion Detection 4.2.4 is now pre-installed.

8.30.1:F7
Prepared support for signed firmware to increase overall cyber security level.
It is planned that the product will only accept AXIS security-signed firmware
starting in Q1/Q2 2019 and onwards.


Features in 8.15.1
================================================================================



Corrections in 8.30.1
================================================================================

8.30.1:C1
Corrected an issue that could display wrong possible maximum FPS in Settings ->
Image.

8.30.1:C2
Corrected critical vulnerability ACV-128401.

8.30.1:C3
Corrected an issue that could cause the camera to get stuck in night mode when
WDR setting changed.

8.30.1:C4
Corrected an issue that caused the camera to become unresponsive on rare
occasions when running ACAPs without specified ApplicationId.

8.30.1:C5
Increased user awareness when converting legacy overlays to dynamic overlays. A
restart of ongoing recordings is required after overlay conversion.

8.30.1:C6
Corrected an issue with the Axis event handling interface when deactivating
events.

8.30.1:C7
Updated OpenSSL to version 1.0.2o to increase overall minimum cyber security
level.


Corrections in 8.15.1
================================================================================



Known Bugs/Limitations
================================================================================

8.30.1.1:L1
When using the Edge or Firefox web browser automatic license installation
doesn't work as expected.

8.30.1.1:L2
Some parts of the web-interface may not be fully translated.

8.30.1.1:L3
It is not possible to update the product using Genetec 5.7 SR2. Genetec will
provide a patch in 5.7 SR3.



Supported AXIS VAPIX API Image Resolutions for M1124/-E/M1125/-E
================================================================================

Resolution  Exceptions
==========  ==========

1920x1080   2)
1600x1200   2)
1400x1050   2)
1280x960    2)
1280x800    2)
1280x720
1024x768
1024x640
800x600
800x500
800x450
640x480
640x400
640x360
480x360
480x300
480x270
320x240
320x200
320x180
240x180
240x135
160x120
160x100
160x90

768x576     1)
704x576     1)
704x480     1)
384x288     1)
352x240     1)
192x144     1)
176x144     1)
176x120     1)

1) Not visible in web user interface
2) 1080p 1920x1080 (16:9) @ 25/30 fps (WDR)