FIRMWARE RELEASE NOTE
=====================

Products affected:        M3016

Release date:             2019-02-20

Release type:             Production

Firmware version:         9.10.1

Preceding release:        8.50.1

--------------------------------------------------------------------------------

Upgrade instructions
====================

Upgrade the firmware according to the instructions given at
https://www.axis.com/ca/en/support/tecnical-notes/how-to-upgrade 
or howtoupgrade.txt, which is included in the firmware folder.


New features in 9.10.1
================================================================================

9.10.1:F1
The following legacy VAPIX parameter have been removed due to non-usage:

Network.DHCP.Fqdn
Network.DHCP.IPCheckEnabled
Network.DHCP.Retries
Network.DHCP.StoreIPAddresseth0
Network.DHCP.StoreIPAddresseth1
Network.DHCP.Timeout

9.10.1:F2
Updated Video Motion Detection to version 4.3.3.

9.10.1:F3
Upgraded Apache to version 2.4.37 to increase overall minimum cyber security
level.

9.10.1:F4
Firwmare Recovery will also rollback the previous state of applications (ACAPs)
now.


Corrections in 9.10.1
================================================================================

9.10.1:C1
Corrected an issue that prevented the product from inserting trigger data in SEI
message when streaming H.264.

9.10.1:C2
Corrected an issues that could cause an incorrect error message when testing
HTTP recipient.

9.10.1:C3
Increased the character limit for certificate IDs from 32 to 128 characters.

9.10.1:C4
Corrected an issue that caused RTSP client timeout to be delayed.

9.10.1:C5
Corrected an issue that caused an HTTP-recipient based action rule to fail when
the response from the server excluded the textual phrase (Example: HTTP 200).
This will work now.

9.10.1:C6
Corrected an issue that caused the temperature information delivered via SNMP
OID to be corrupted.


Known Bugs/Limitations
================================================================================

9.10.1:L1
It is recommended to perform firmware recovery to rollback the products firmware
to a previous version.

Downgrading the products firmware through the usual firmware upgrade process can
cause configuration and ACAP loss. It is recommended to perform a factory
default afterwards.

9.10.1:L2
The VAPIX Parameter Network.RTSP.AllowClientTransportSettings in PlainConfig ->
Network needs to be set to "yes" before video can be streamed via ONVIF
multicast.

9.10.1:L3
It is not possible to set the capture mode in the installation wizard if 50Hz
capture frequency is selected.
Workaround: Set the capture mode under the Image tab after finishing the
installation wizard.


Supported AXIS VAPIX API Image Resolutions for M3016
================================================================================

Resolution  Exceptions
==========  ==========

2016x1512   2)
2304x1296   3)
1920x1080
1280x960
1280x720
1024x768
1024x576
800x600
640x480
640x360
352x240
320x240

768x576     1)
704x576     1)
704x480     1)
384x288     1)
352x288     1)

1) Not visible in web user interface
2) 3MP (2016x1512)
3) 3MP 16:9 (2304x1296)