FIRMWARE RELEASE NOTE
=====================

Products affected:        M3106-L/-LVE

Release date:             2019-02-20

Release type:             Production

Firmware version:         9.10.1

Preceding release:        8.50.1

--------------------------------------------------------------------------------

Upgrade instructions
====================

Upgrade the firmware according to the instructions given at
https://www.axis.com/ca/en/support/tecnical-notes/how-to-upgrade 
or howtoupgrade.txt, which is included in the firmware folder.


New features in 9.10.1
================================================================================

9.10.1:F1
The following legacy VAPIX parameter have been removed due to non-usage:

Network.DHCP.Fqdn
Network.DHCP.IPCheckEnabled
Network.DHCP.Retries
Network.DHCP.StoreIPAddresseth0
Network.DHCP.StoreIPAddresseth1
Network.DHCP.Timeout

9.10.1:F2
Updated Video Motion Detection to version 4.3.3.

9.10.1:F3
Upgraded Apache to version 2.4.37 to increase overall minimum cyber security
level.

9.10.1:F4
Firwmare Recovery will also rollback the previous state of applications (ACAPs)
now.


Corrections in 9.10.1
================================================================================

9.10.1:C1
Corrected an issue that prevented the product from inserting trigger data in SEI
message when streaming H.264.

9.10.1:C2
Corrected an issues that could cause an incorrect error message when testing
HTTP recipient.

9.10.1:C3
Increased the character limit for certificate IDs from 32 to 128 characters.

9.10.1:C4
Corrected an issue that caused RTSP client timeout to be delayed.

9.10.1:C5
Corrected an issue that caused an HTTP-recipient based action rule to fail when
the response from the server excluded the textual phrase (Example: HTTP 200).
This will work now.

9.10.1:C6
Corrected an issue that caused the temperature information delivered via SNMP
OID to be corrupted.


Known Bugs/Limitations
================================================================================

9.10.1:L1
It is recommended to perform firmware recovery to rollback the products firmware
to a previous version.

Downgrading the products firmware through the usual firmware upgrade process can
cause configuration and ACAP loss. It is recommended to perform a factory
default afterwards.

9.10.1:L2
The VAPIX Parameter Network.RTSP.AllowClientTransportSettings in PlainConfig ->
Network needs to be set to "yes" before video can be streamed via ONVIF
multicast.

9.10.1:L3
It is not possible to set the capture mode in the installation wizard if 50Hz
capture frequency is selected.
Workaround: Set the capture mode under the Image tab after finishing the
installation wizard.


Supported AXIS VAPIX API Image Resolutions for M3106-L/-LVE
================================================================================

Resolution  Exceptions
==========  ==========

2688x1520   1)
2560x1440   2)
1920x1080
1280x960
1280x720
1024x768
1024x576
800x600
640x480
640x360
352x240
320x240


1) 4MP (2688x1520)
2) QHD (2560x1440)