FIRMWARE RELEASE NOTE 
=====================

Products affected:  AXIS P1357/-E

Release date: 	    2015-10-16 

Release type: 	    Production

Firmware version:   5.90.1

File name:          P1357_5_90_1.bin

Preceding release:  5.70.1.1

--------------------------------------------------------------------------------

Upgrade instructions
=====================

Upgrade the firmware with AXIS Camera Management, HTTP, or FTP.
Follow the instructions given in the User Manual, at 
http://www.axis.com/support/tecnical-notes/how-to-upgrade, 
or howtoupgrade.txt, which is included in the firmware folder.


New features
============

5.90.1:F1
AXIS Video Motion Detection 3, which includes Axis False Alarm Filtering, is 
now a pre-installed ACAP application and replaces the built-in Motion Detection 
in the product Web GUI. The built-in Motion Detection is still available via 
VAPIX. 
  
Axis strongly recommends current users of the Motion Detection API to plan for 
transfer to the AXIS Video Motion Detection 3 API, please see the VAPIX 
Library. 

5.90.1:F2
Available ONVIF Media Profiles are now presented and configurable using the 
product Web GUI. 

5.90.1:F3
With SD card Encryption it is now possible to enable encryption of the SD card 
to protect your data. This encryption is transparent to users and VMS solutions 
making it possible to activate without adaptations. 
 
This feature is presented and configurable both in the Web GUI and via VAPIX.  

5.90.1:F4
Improved start-up time. 

5.90.1:F5
Max exposure time parameter is now available in the Camera Settings. It can be 
used in LPR installations when setting Max exposure time shorter than default 
Max shutter time. 

5.90.1:F6
SNMP MIB r/w OID values are saved after reboot. 


Corrections
============

5.90.1:C1
Select "Use Temporary Mode" if during ftp upload temporary files are required. 

5.90.1:C2
Improved robustness for Axis ACAPs. 

5.90.1:C3
Improved handling of frequent I/O triggering.  

5.90.1:C4
When DST is enabled, export recordings can now be done via web interface. 

5.90.1:C5
Reduced audio noise levels from internal microphone. 

5.90.1:C6
Passwords can now contain "#". 

5.90.1:C7
PullMessages now follow the ONVIF specification 9.1.2. 

5.90.1:C8
Users with admin permissions can edit ACAP configuration settings. 

5.90.1:C9
Manual triggers for all enabled View Areas are shown. 

5.90.1:C10
It is now possible to select starting point when playing back a recording while 
using multicast and H.264. 

5.90.1:C11
Improved synchronization between sound and video when having low fps and long 
GOV length. 


Known Bugs/Limitations
======================

5.90.1:L1
Recording streams to SD card with a total bit rate above 12Mbit/sec may cause 
missing frames/sequences. 

5.90.1:L2
If setting the video stream resolution to an invalid value, it is not 
possible to start streaming without specifying a valid resolution or correcting 
the video stream resolution to a valid resolution. 


Supported AXIS VAPIX API Image Resolutions for AXIS P1357/-E
============================================================

Resolution  Exceptions
==========  ==========

2592x1944   2)
2048x1536   2) 3)
1920x1080   2) 3) 4)
1600x1200   2) 3) 5)
1280x1024   
1280x960    
1280x800    2)
1280x720    
1024x768    
800x600     
800x450     
640x480     
640x360     
480x360     
480x270     
320x240     
320x180     
240x180     
176x144     
160x120     
160x90      

2560x1920   1) 2)
2560x1440   1) 2)
768x576     1)
720x576     1) 2)
704x576     1)
704x480     1)
704x288     1)
704x240     1)
384x288     1)
352x288     1)
352x240     1)
240x135     1)
192x144     1)
176x120     1)

1) Not visible in web user interface
2) 5MP 2592x1944 (4:3)
3) 3 MP 2048x1536 (4:3)
4) HDTV 1080p 1920x1080 (16:9)
5) 2 MP 1600x1200 (4:3)