FIRMWARE RELEASE NOTE
=====================

Products affected:        P1375-E

Release date:             2019-03-19

Release type:             Production

Firmware version:         9.15.1.1

New product:              No previous release

--------------------------------------------------------------------------------

Upgrade instructions
====================

Upgrade the firmware according to the instructions given at
https://www.axis.com/ca/en/support/tecnical-notes/how-to-upgrade 
or howtoupgrade.txt, which is included in the firmware folder.


New features in 9.15.1.1
================================================================================

9.15.1.1:F1
The following legacy VAPIX parameter have been removed due to non-usage:

Network.DHCP.Fqdn
Network.DHCP.IPCheckEnabled
Network.DHCP.Retries
Network.DHCP.StoreIPAddresseth0
Network.DHCP.StoreIPAddresseth1
Network.DHCP.Timeout

9.15.1.1:F2
Reconfiguration of stream cache where the three worst case buffer were removed
and stream cache handling is done more dynamically on demand.

PRODUCT CHIP    HIGH. RES, VMEM CACHE
FA54 ARTPEC-6 1920x1080 512 192 >178
M3057/8 ARTPEC-6 2992x2992 792 256>256
P1367 ARTPEC-6 3072x1728 512 256->200
P1368-E ARTPEC-6 3840x2160 512 256->240
P1447-LE ARTPEC-6 3072x1728 512 256->200
P1448-LE ARTPEC-6 3840x2160 512 256->240
P3227/8 ARTPEC-6 3840x2160 512 256->240
Q1645 ARTPEC-6 1920x1080 512 256->80
Q3515 ARTPEC-6 1920x1080 512 256->80
Q3517 ARTPEC-6 3072x1728 512 256->200
P1375 ARTPEC-7 1920x1080 512 96->80

9.15.1.1:F3
Image rotation per video stream is not supported on newer ARTPEC generations any
longer. Instead the rotation of a video stream is configured globally per video
source.

9.15.1.1:F4
Updated Video Motion Detection to version 4.3.3.

9.15.1.1:F5
Upgraded Apache to version 2.4.37 to increase overall minimum cyber security
level.

9.15.1.1:F6
Firwmare Recovery will also rollback the previous state of applications (ACAPs)
now.


Corrections in 9.15.1
=====================

9.15.1.1:C01
Disabled the Energy-Efficient Ethernet mode that caused network connection
issues on rare occasions.


Known Bugs/Limitations
================================================================================

9.15.1.1:L1
It is recommended to perform firmware recovery to rollback the products firmware
to a previous version.

Downgrading the products firmware through the usual firmware upgrade process can
cause configuration and ACAP loss. It is recommended to perform a factory
default afterwards.

9.15.1.1:L2
Refresh the webpage if the image turns black after rotating the camera.

9.15.1.1:L3
Parts of the privacy mask may become invisible in rare occasions during
configuration. If this happens, please try to modify the mask slightly.

9.15.1.1:L4
P1375-E will request POE class 4 (30W) even if AXIS IR Illuminator Kit A is not
connected.
It is possible to power this product with POE class 3 (15W) if not using IR
Illuminator Kit A

9.15.1:.1L5
The VAPIX Parameter Network.RTSP.AllowClientTransportSettings in PlainConfig ->
Network needs to be set to "yes" before video can be streamed via ONVIF
multicast.


Supported AXIS VAPIX API Image Resolutions for P1375-E
================================================================================

Resolution  Exceptions
==========  ==========

1920x1080
1440x1080
1440x900
1280x960
1280x800
1280x720
1024x768
1024x640
1024x576
800x600
800x500
800x450
640x480
640x400
640x360
480x360
480x300
480x270
320x240
320x200
320x180
240x180
160x120
160x100
160x90

1400x1050   1)
768x576     1)
720x576     1)
854x480     1)
704x576     1)
704x480     1)
704x288     1)
704x240     1)
384x288     1)
352x288     1)
352x240     1)
192x144     1)
176x144     1)
176x120     1)

1) Not visible in web user interface