FIRMWARE RELEASE NOTES
          ======================

Products affected: AXIS Q1614/-E Network Camera

Release date:      2014-01-17

Release type:      Production

Firmware version:  5.55.1.1

File name:         Q1614_5_55_1_1.bin

Preceding release: 5.55.1

AMC version:       IR6.3.12.0-1

------------------------------------------------------------------
UPGRADE INSTRUCTIONS
====================

The firmware can be upgraded using Axis Camera Management 3.0, 
HTTP or FTP. Please follow the instructions from the user's 
manual, the web page at howtoupgrade.txt.

Release 5.55.1.1
================

Corrections since 5.55.1
=================
5.55.1.1:C01 Improved SD card recording when using ext4 file system.

Known Bugs/Limitations
======================
5.55.1.1:L01 
When the automatic IR cut filter enables/disables the IR cut 
filter, it may trigger motion detection.

5.55.1.1:L02
Using control queue with Java Applet may result in wrong queue 
positions if switching between admin and viewer users. 

5.55.1.1:L03
The ipv6.class field will have the same value in all IPv6 packages. 
The class field value depends on the value of the DSCP setting. 

5.55.1.1:L04 
You can wait more than 60 minutes between activating IDDNS and 
registering the product on axiscam.net.

5.55.1.1:L05
The Audio tab web page indicates loading until moving to a different 
tab or page. 

5.55.1.1:L06
Video performance might be degraded when IP address filtering is 
enabled. Disable network filter logging in Plain Config to increase 
performance. 

5.55.1.1:L07
Reboot is necessary after enabling SOCKS. 

5.55.1.1:L08 
When streaming with the G726  audio codex using bitrate 24kbit/s 
only distorted audio is heard in the stream. The same distorted 
audio is heard on the camera output when sending audio to it. 

5.55.1.1:L09
The interval between Bonjour probe retries is too short.

5.55.1.1:L10
You cannot trigger digital inputs set to the any setting through 
the VAPIX.

APPLICATION DEVELOPER Information
=================================

The AXIS VAPIX Application Programming Interface version 3 is 
supported by this product. For more information please refer to 
the AXIS VAPIX HTTP API specification version 3 part of the AXIS 
VAPIX API available at www.axis.com.

Supported AXIS VAPIX API Image Resolutions

Resolution  Exceptions
==========  ==========
1280x960	2)
1280x720	3)
1024x768 	3)  
1024x640  	3) 
800x600     	3)
800x500    	3)
800x450     	3)
640x480     
640x400     
640x360     
480x360     
480x300     
480x270     
320x240     
320x200     
320x180     
240x180     
176x144     
160x120     
160x100     
160x90      
768x576     	4)
720x576     	4)
1400x1050	1)2)
704x576     	1)
704x480    	1)
704x288     	1) 
704x240    	1)
384x288    	1) 
352x288    	1)
352x240     	1)
240x135     	1)
192x144     	1)
176x120    	1)
80x50         	1)

1) Not visible in the web interface
2) Only in capture mode 1 - 720p@25/30fps
3) Only in capture mode 1 and 2 - 720p@25/30fps and 720p@50/60fps 
4) Only in capture mode 3 - Extended D1 in the web interface, 
via VAPIX in capture mode 1 and 2 - 720p@25/30fps and 720p@50/60fps