FIRMWARE RELEASE NOTES
                        ======================

Products affected: AXIS Q1765

Release date:      2017-06-08

Release type:      Production

Firmware version:  6.50.1.2

File name:         Q1765_6_50_1_2.bin

Preceding release: 6.50.1.1

--------------------------------------------------------------------------------

UPGRADE INSTRUCTIONS
====================

The firmware can be upgraded using Axis Camera Management, HTTP or FTP.
Please follow the instructions from the user's manual, the web page at
http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named
howtoupgrade.txt.


Corrections in 6.50.1.2 since 6.50.1.1
======================================

6.50.1.2:C01
Fixed a bug that prevented a ONVIF client to connect to the camera via digest
authentication.

6.50.1.2:C02
Fixed critical vulnerability ACV-116267.


Known Bugs/Limitations
======================

6.50.1.2:L1
It's recommended to factory default the unit before making a downgrade if
needed.

6.50.1.2:L2
Network Lost event can not be triggered.

6.50.1.2:L3
Recording streams to SD card with a total bit rate above 12Mbit/sec may cause
missing frames/sequences.

6.50.1.2:L4
When changing an active https-certificate, the product needs to be restarted for
the new certificate to be applied.

6.50.1.2:L5
Upgrading from firmware 5.40 and prior requires an upgrade of the recordings
database. This can take up to five minutes and is performed on first boot. Make
sure not to remove power, SD card or NAS during the first five minutes after
upgrading the product.

Recordings made with firmware earlier than 5.20 will not be readable on the SD
Card from firmware 5.40 and onward. Backup important recordings and reformat the
SD card after the firmware upgrade.

6.50.1.2:L6
Password longer than 64 characters is truncated without notifying the user about
it.

6.50.1.2:L7
An image stream over RTSP will not be released correctly if using RTSPSRC
0.10.31 in a Linux client.

6.50.1.2:L8
Setting a fixed shutter time on a channel to a high value, for instance 2s, the
other streams in the quad channel are limited by this setting regardless what
they are set to.

6.50.1.2:L9
Pan limits set using VAPIX are not reflected using ONVIF.


Supported AXIS VAPIX API Image Resolutions for AXIS Q1765
=========================================================

Resolution  Exceptions
==========  ==========

1920x1080   2)
1280x960
1280x800
1280x720
1024x768
1024x640    3)
800x600
800x450
640x480
640x360
480x360
480x270
320x240
320x180
240x180
176x144
160x120
160x100     2)
160x90

1400x1050   1) 3)
768x576     1)
720x576     1) 2)
704x576     1)
704x480     1)
704x288     1)
704x240     1)
384x288     1)
352x288     1)
352x240     1)
240x135     1)
192x144     1)
176x120     1)

1) Not visible in web user interface
2) Full resolution (1080P mode)
3) 720p 1280x960 (4:3) @ 30fps