FIRMWARE RELEASE NOTE 
=====================

Products affected:	AXIS Q6000-E Network Camera

Release date: 		2016-04-01 

Release type: 		Production

Firmware version: 	5.95.2

File name: 	 	Q6000-E_5_95_2.bin

Preceding release: 	5.65.1.1

--------------------------------------------------------------------------------


Upgrade instructions
=====================

Upgrade the firmware with AXIS Camera Management, HTTP, or FTP.
Follow the instructions given in the User Manual, at 
http://www.axis.com/support/tecnical-notes/how-to-upgrade, 
or howtoupgrade.txt, which is included in the firmware folder.


New Features
============

5.95.2:F01
Added Remote Gatekeeper, a wizard for easy configuration of motion detection
events connected to PTZ actions. 

5.95.2:F02
Zoom Out Button now available in Live View of Q6000-E to completely zoom out 
the connected PTZ camera. Can be enabled/disabled in Live View Config. It is
enabled by default.

5.95.2:F03
New wizard for camera calibration.

5.95.2:F04
Implemented Axis Zipstream. For more information see: 
http://www.axis.com/technologies/zipstream 
Fixed GOP mode works with all implementations whereas Zipstream dynamic GOP 
mode may require clients to adapt their H.264 playback implementation.  
VAPIX Library is updated with new information and new APIs.  

5.95.2:F05
Available ONVIF Media Profiles are now presented and configurable using the 
product Web GUI. 

5.95.2:F06
With SD card Encryption it is now possible to enable encryption of the SD card 
to protect your data. This encryption is transparent to users and VMS solutions 
making it possible to activate without adaptations.  
This feature is presented and configurable both in the Web GUI and via VAPIX.  

5.95.2:F07
Improved start-up time. 

5.95.2:F08
Native IE11 support implemented. 

5.95.2:F09
Axis network cameras now support NAS drives over 2TB. 

5.95.2:F10
Secure FTP (SFTP) is now supported for a more secure file transfer method. 


Corrections
===========
5.95.2:C01
Fix for AMC with IE10 when using IPv6 is included. 

5.95.2:C02
Camera can now be accessed via Service Port even when no network is connected on
the main port. 

5.95.2:C03
Privacy masks placed at the bottom of channel 3 and 4, or all the way to the 
right of channel 2 and 4 will not be correctly placed in the quad channel. 

5.95.2:C04
Improved SD card recording handling. 


Known Bugs/Limitations
======================

5.95.2:L01
It is possible to modify a Remote Gatekeeper action rule after the wizard is 
done but please have in mind that this action rule need to be deleted in the 
event setup first in order to start a new Remote Gatekeeper wizard may later 
on. 

5.95.2:L02
Recording streams to SD card with a total bit rate above 12Mbit/sec may cause 
missing frames/sequences. 

5.95.2:L03
HTTP notification via proxy using digest authentication does not work. Use 
basic authentication instead. 

5.95.2:L04
When changing an active https-certificate, the product needs to be restarted 
for the new certificate to be applied. 

5.95.2:L05
Quad view doesn't support text overlay but it will still show text overlay from 
individual streams. That means framerate and bandwidth numbers will be 
irrelevant. It is not possible to get a quad view with individual rotated 
streams either. 

5.95.2:L06
Message "Initializing camera, please wait..." seen after restart. A restart 
solves the issue. 

5.95.2:L07
RTSP over TCP may cause choppy video if block size is not optimized or set 
during video connection. 

5.95.2:L08
Embedded Motion Detection: When object size is set to low and sensitivity set 
to high, motion detection can occasionally be triggered when switching the IR 
filter on/off. 

5.95.2:L09
https://trouble/ticket/96365
Video stream during PTZ calibration process and RemoteGatekeeper configuration
is not available when HTTPS with self-signed certificate is enabled and IE11 is
used. It is recommended to use another browser, add the ip-address of the camera
to the secure white list and reload the webpage. 



APPLICATION DEVELOPER Information
=================================

The AXIS VAPIX Application Programming Interface version 3 is supported by this product.
For more information please refer to the AXIS VAPIX HTTP API specification 
version 3 part of the AXIS VAPIX API available at www.axis.com.

Supported AXIS VAPIX API Image Resolutions

Resolution  Exceptions
==========  ==========
1920x1440	2)
1920x1080	2)
1440x1080	2)
1280x960	2)
1280x720
960x720
800x600
800x450
640x480
480x270

1600x1200	1,2)
1280x1024	1,2)
1024x768	1,2)
1024x640	1)
854x480		1)
800x500		1)
768x576		1)
720x576		1)
704x576		1)
704x480		1)
704x288		1)
704x240		1)
640x400		1)
640x360		1)
480x360		1)
480x300		1)
384x288		1)
352x288		1)
352x240		1)
320x240		1)
320x200		1)
240x180		1)
240x135		1)
192x144		1)
176x144		1)
176x120		1)
160x120		1)
160x100		1)
160x90		1)
80x50		1)

1) Not visible in web user interface
2) Only usable for quad view