FIRMWARE RELEASE NOTE
=====================

Products affected:	AXIS Q6000-E/ Network Camera

Release date: 		2016-05-26

Release type: 		Production

Firmware version: 	5.95.3.1

File name: 	 	Q6000-E_5_95_3.bin

Preceding release: 	5.95.2
			--------------------------------------------------------------------------------


Upgrade instructions
=====================

Upgrade the firmware with AXIS Camera Management, HTTP, or FTP.
Follow the instructions given in the User Manual, at
http://www.axis.com/support/tecnical-notes/how-to-upgrade,
or howtoupgrade.txt, which is included in the firmware folder.


Corrections in 5.95.3 since 5.95.2
======================================

5.95.3.1:C01
Fixed a critical security vulnerability - update strongly recommended.


Known Bugs/Limitations
======================

5.95.3:L01
It is possible to modify a Remote Gatekeeper action rule after the wizard is
done but please have in mind that this action rule need to be deleted in the
event setup first in order to start a new Remote Gatekeeper wizard may later
on.

5.95.3:L02
Recording streams to SD card with a total bit rate above 12Mbit/sec may cause
missing frames/sequences.

5.95.3:L03
HTTP notification via proxy using digest authentication does not work. Use
basic authentication instead.

5.95.3:L04
When changing an active https-certificate, the product needs to be restarted
for the new certificate to be applied.

5.95.3:L05
Quad view doesn't support text overlay but it will still show text overlay from
individual streams. That means framerate and bandwidth numbers will be
irrelevant. It is not possible to get a quad view with individual rotated
streams either.

5.95.3:L06
Message "Initializing camera, please wait..." seen after restart. A restart
solves the issue.

5.95.3:L07
RTSP over TCP may cause choppy video if block size is not optimized or set
during video connection.

5.95.3:L08
Embedded Motion Detection: When object size is set to low and sensitivity set
to high, motion detection can occasionally be triggered when switching the IR
filter on/off.

5.95.3:L09
Video stream during PTZ calibration process and RemoteGatekeeper configuration
is not available when HTTPS with self-signed certificate is enabled and IE11 is
used. It is recommended to use another browser, add the ip-address of the camera
to the secure white list and reload the webpage.

5.95.3:L10
Calibration is not working for 1080p resolution or for accessory lenses.



Supported AXIS VAPIX API Image Resolutions

Resolution  Exceptions
==========  ==========
1920x1440	2)
1920x1080	2)
1440x1080	2)
1280x960	2)
1280x720
960x720
800x600
800x450
640x480
480x270

1600x1200	1,2)
1280x1024	1,2)
1024x768	1,2)
1024x640	1)
854x480		1)
800x500		1)
768x576		1)
720x576		1)
704x576		1)
704x480		1)
704x288		1)
704x240		1)
640x400		1)
640x360		1)
480x360		1)
480x300		1)
384x288		1)
352x288		1)
352x240		1)
320x240		1)
320x200		1)
240x180		1)
240x135		1)
192x144		1)
176x144		1)
176x120		1)
160x120		1)
160x100		1)
160x90		1)
80x50		1)

1) Not visible in web user interface
2) Only usable for quad view