FIRMWARE RELEASE NOTE 
=====================

Products affected: 	AXIS Q6114-E

Release date: 		2016-03-15 

Release type: 		Production

Firmware version:  	6.20.1

File name:         	Q6114-E_6_20_1.bin

Preceding release: 	5.65.2.1

--------------------------------------------------------------------------------


Upgrade instructions
=====================

Upgrade the firmware with AXIS Camera Management, HTTP, or FTP.
Follow the instructions given in the User Manual, at 
http://www.axis.com/support/tecnical-notes/how-to-upgrade, 
or howtoupgrade.txt, which is included in the firmware folder.


New features
============

6.20.1:F1
Edge storage recording robustness is improved with an automatic database repair 
feature. 

6.20.1:F2
Support for the NTCIP ACAP. 

6.20.1:F3
It is now possible to have recurrence in seconds. 

6.20.1:F4
Auto-iris will be enabled after manual PTZ movement from a preset with 
manual iris settings.

6.20.1:F5
SNMP MIB r/w OID values are saved after reboot. 

6.20.1:F6
A new PTZ parameter (AdjustableZoomSpeedEnabled) for enabling/disabling 
adjustable zoom speed has been added to PTZ cameras. 

6.20.1:F7
Improved info in server report from software and hardware PoE 
detection/negotiation. 

6.20.1:F8
Secure FTP (SFTP) is now supported for a more secure file transfer method. 

6.20.1:F9
Edge Storage robustness is improved with features to detect and repair faults 
due to unexpected loss of storage media.  

6.20.1:F10
Storage limit offers a possibility to control how much storage space may be 
used for recordings. This is available via VAPIX. 

6.20.1:F11
Axis network cameras now support NAS drives over 2TB. 

6.20.1:F12
Storage manager now collects information about SD card usage. 

6.20.1:F13
Available ONVIF Media Profiles are now presented and configurable using the 
product Web GUI. 

6.20.1:F14
With SD card Encryption it is now possible to enable encryption of the SD card 
to protect your data. This encryption is transparent to users and VMS solutions 
making it possible to activate without adaptations.  
This feature is presented and configurable both in the Web GUI and via VAPIX.  

6.20.1:F15
Improved start-up time. 

6.20.1:F16
Removed predefined stream profiles: Quality, HDTV, Balanced, Bandwidth, Mobile. 

6.20.1:F17
Upgrade OpenSSL to version 1.0.2d. This version also provides support for TLS 
1.2. 

6.20.1:F18
Improved Axis Zipstream technology for PTZ cameras. 


Corrections
============

6.20.1:C1
RTSP over TCP may cause choppy video if block size is not optimized or set 
during video connection.  

6.20.1:C2
Improved SD card recording handling. 

6.20.1:C3
Video stream is available when using IPv6 with Internet Explorer 11 and AMC. 

6.20.1:C4
ONVIF users are now handled when PTZ Control Queue is enabled. 

6.20.1:C5
Startup time is not affected if a network share is mounted. 

6.20.1:C6
Exposure improvements when enabling custom exposure zones 

6.20.1:C7
Removed LLDP-MED logs containing spam. 

6.20.1:C8
It is possible to set the RTPS timeout in the URL specifying the stream. 

6.20.1:C9
Fine tuning of IR cut filter switch in automatic mode 

6.20.1:C10
Preview window is updated when changing Video Stream settings.  

6.20.1:C11
Solve network share mount failures at startup. 

6.20.1:C12
When DST is enabled, export recordings can now be done via web interface. 

6.20.1:C13
It is now possible to a select starting point when playing back a recording 
while using multicast and H.264. 

6.20.1:C14
PullMessages now follow the ONVIF specification 9.1.2. 

6.20.1:C15
Rule is now triggered on startevent/"signal raise" and not on condition. 

6.20.1:C16
Users with admin permissions can edit ACAP configuration settings. 

6.20.1:C17
Camera is reached through HTTPS when NAT traversal is enabled. 

6.20.1:C18
Improved Privacy mask alignment. 

6.20.1:C19
Improved synchronization between sound and video when having low fps and long 
GOV length. 

6.20.1:C20
Fixed issue with Guardtour recording, where the Guardtour can disappear from 
the web interface. 

6.20.1:C21
An overlay text in Live View is displayed when the camera is performing 
pan/tilt calibration and additional logging functions has been added 

6.20.1:C22
Product is shutting down PTZ functionalities for safety reason when pan/tilt 
calibration failed too many times. 

6.20.1:C23
Improved response performance of GetCompatibleVideoEncoderConfigurations. 

6.20.1:C24
Corrected H264 payloader behaviour to now insert PPS/SPS frames before every 
I-frame. This will improve behavior, especially with clients that uses 
multicast. 

6.20.1:C25
Corrected image corruption issue seen in corridor format. 

6.20.1:C26
Overview map removed when PTZ controls are disabled. 

6.20.1:C27
Improvements in Shock detection to reduce false alarms by SpeedDry or PTZ 
movements. 

6.20.1:C28
Added ACAP support for NV12 format. 


Known Bugs/Limitations
============

6.20.1:L1
When the automatic IR cut filter enables/disables the IR cut filter, it may 
trigger motion detection. 

6.20.1:L2
Recording streams to SD card with a total bit rate above 12Mbit/sec may cause 
missing frames/sequences. 

6.20.1:L3
When enabling the control queue while using Java applet as default viewer 
access to PTZ is denied. The PTZ tab that is usually available is not and so it 
is not possible to use either center mode or joystick mode. 
The PTZ bars still work and the control queue appears to work correctly. 

6.20.1:L4
Embedded Motion Detection: When object size is set to low and sensitivity set 
to high, motion detection can occasionally be triggered when switching the IR 
filter on/off. 

6.20.1:L5
Text modifiers #x #y #z #Z #L do not work for upload file/folder names, 
TCP/HTTP notification text or e-mail  subject/message. 

6.20.1:L6
Pan limits set using VAPIX are not reflected using ONVIF. 

6.20.1:L7
Automatic gain setting needs to be configured to 42dB for the use of color 
optimized Day/Night switch priority setting, otherwise night mode will never 
trigger. 

6.20.1:L8
Area of interest is not shown during reconfiguring of detectors created when 
the camera was configured with a different video rotation setting. 

6.20.1:L9
Current iris setting indicator is not shown in automatic iris mode. 


Resolution Exceptions
========== ===========

1280x720    
800x450     
480x270     
320x180     

1024x768    1)
1024x576    1)
800x600     1)
768x576     1)
720x576     1)
704x576     1)
704x480     1)
640x480     1)
640x360     1)
704x288     1)
480x360     1)
704x240     1)
384x288     1)
352x288     1)
352x240     1)
320x240     1)
240x180     1)
192x144     1)
176x144     1)
176x120     1)
160x120     1)
160x90      1)
analyze     1)

1) Not visible in web user interface