FIRMWARE RELEASE NOTE ====================== Products affected: Q6155-E Release date: 2018-05-09 Release type: Production Firmware version: 8.20.1.1 Preceding release: 8.20.1 -------------------------------------------------------------------------------- Upgrade instructions ==================== The firmware can be upgraded using Axis Camera Management, HTTP or FTP. Please follow the instructions from the user's manual, the web page at http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named howtoupgrade.txt. NOTE ==================== For latest information about Axis Cybersecurity, see https://www.axis.com/se/sv/support/product-security. Corrections in 8.20.1.1 since 8.20.1 ==================================== 8.20.1.1:C01 General minor improvements. New features in 8.20.1 ================================================================================ 8.20.1:F1 The possibility to edit scripts in camera has been disabled per default in order to increase minimum cyber security level. 8.20.1:F2 Support for zoom-tracking in Recorded Guard Tour. Previously only pan/tilt movements were recorded. 8.20.1:F3 Updated AXIS Video Motion Detection to version 4.2.1. 8.20.1:F4 Updated NTP server (openntpd) to version 6.2p3. 8.20.1:F5 Updated Fence- and Motion-Guard to version 2.1 with support for burnt-in alarm overlay support. 8.20.1:F6 Added support for showing hidden resolutions via API. The parameter Properties.Image.ShowSuboptimalResolutions has been added which will, when enabled, show all of the products supported resolutions. Features in 8.10.1 ================================================================================ 8.10.1:F1 VMD (Video Motion Detection) is updated to version 4.2. 8.10.1:F2 Changed the behavior of the heater and the fan to keep the temperature in the dome higher. Corrections in 8.20.1 ================================================================================ 8.20.1:C1 Corrected an issue that made it necessary for the user to refresh manually the storage configuration page in the web-interfce to be updated e.g. when a storage has been disconnected from the camera. 8.20.1:C2 Corrected an issue that caused the camera to stop streaming in rare occasions. 8.20.1:C3 Corrected an issue that made it necessary to login twice when connecting to the web-interface using Microsoft Edge. 8.20.1:C4 Corrected an issue that prevented trigger data to be inserted in every I-frame and when motion detection triggers. 8.20.1:C5 Corrected an issue when testing multiple email recipients. 8.20.1:C6 Corrected an issue where e-mail recipients could be wrongly formatted. 8.20.1:C7 Corrected an issue that prevented the user from taking image snapshots in H264 when using the Safari web browser. 8.20.1:C8 Corrected an issue that prevented the use of the whole sensor width for some aspect ratios. 8.20.1:C9 Corrected an issue that could cause synchronization to AVHS to fail. 8.20.1:C10 Corrected critical vulnerability ACV-128401. 8.20.1:C11 Corrected an issue with the AXIS event handler registration for ADP partners. 8.20.1:C12 Corrected an issue that caused the camera to become unreachable via link local address in the network when connecting client was in another subnet. Corrections in 8.10.1 ================================================================================ 8.10.1:C1 Corrected an issue with MJPEG images becoming corrupted in rare occasions. 8.10.1:C2 Corrected security vulnerability CVE-2017-9798. 8.10.1:C3 Corrected an issue when creating user accounts in Microsoft Edge 38 or IE 11. 8.10.1:C4 Corrected an issue that could cause noise in images in rare occasions. Known Bugs/Limitations ================================================================================ 8.20.1.1:L1 When downgrading a firmware the static IP configuration is lost. Axis recommends to perform a factory reset after downgrading. 8.20.1.1:L2 When performing a firmware rollback to a version older than 5.90 the database on an SD-card or the network share will be incompatible and it needs to be reformatted. 8.20.1.1:L3 When using an iOS device and Chrome or Safari web browser it is not possible to switch from viewer to administrator or operator. 8.20.1.1:L4 Corrected an issue that could cause the camera to get stuck in night mode when WDR setting changed. 8.20.1.1:L5 It is not possible to update the product using Genetec 5.7 SR2. Genetec will provide a patch in 5.7 SR3. 8.20.1.1:L6 The following kernel log messages are expected to show up in the log file but do not mean any negative impact: [ ERR ] kernel: gpio-amcu: Failed to set 503 to 1 [ ERR ] kernel: gpio-amcu: Failed to set 504 to 1 8.20.1.1:L7 Zooming via mouse scroll does not work in 8.20.1 release. Factory default or update to higher firmware, when available, is recommended. 8.10.1:L1 A user might experience frame drops in rare conditions when video streaming in Firefox 57 due to specific computer hardware. It is recommended to use Google Chrome instead. 8.10.1:L2 When performing a firmware rollback to a version older than 5.90 the database on an SD-card or the network share will be incompatible and it needs to be reformatted. 8.10.1:L3 When the camera is restored, the time zone is not saved meaning that it will be set to GMT 0. Supported AXIS VAPIX API Image Resolutions for Q6155-E ================================================================================ Resolution Exceptions ========== ========== 1920x1080 2) 1280x720 800x450 480x270 320x180 1280x960 1) 2) 1024x768 1) 1024x576 1) 800x600 1) 768x576 1) 720x576 1) 704x576 1) 704x480 1) 640x480 1) 640x360 1) 704x288 1) 480x360 1) 704x240 1) 384x288 1) 352x288 1) 352x240 1) 320x240 1) 240x180 1) 192x144 1) 176x144 1) 176x120 1) 160x120 1) 160x90 1) analyze 1) 1) Not visible in web user interface 2) 1080p 1920x1080 (16:9) @ 25/30 fps