FIRMWARE RELEASE NOTES
          ======================

Products affected: AXIS Q7411 Network Camera

Release date:      2013-01-14

Release type:      Production

Firmware version:  5.40.13.2

File name:         Q7411_5_40.bin

Preceding release: 5.40.13.1

AMC version:       6.2.10.8-1

------------------------------------------------------------------------------
UPGRADE INSTRUCTIONS
====================

The firmware can be upgraded using Axis Camera Management 3.0, HTTP or FTP.
Please follow the instructions from the user's manual, the web page at
http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named
howtoupgrade.txt.

Release 5.40
=================


Corrections since 5.40.13.1
==========================

5.40.13.1:L43211 Created a new port type for coax PTZ controlled devices. Users must upgrade the Pelco_Coax-4.1 driver to Pelco_Coax_Port-5.0 after firmware upgrade.

5.40.13.1:L43053. A new parameter, 'auto' has been added to ptzupgrader.cgi. This parameter is used to automatically match the port required by the driver to the ports available in the system. See Vapix documentation for more details.

5.40.13.1:L42927 The PTZ home preset position does not work after a restart.

5.40.13.1:L43450 I/O outputs becomes active when the unit is restarted. The problem only occurr during startup, once the unit is up and running again the I/O outputs take on the state as configured by the user.


Known Bugs/Limitations
======================

5.40.13.2:L22713 Cannot record audio clip with no wait time. You must wait at least 1 second.

5.40.13.2:L29671 Constant bit rate might fluctuate more than 10%. 

5.40.13.2:L29731 Frame Size Control does not affect the size of the snapshot taken with the upper right control that can be added to the Live View.

5.40.13.2:L33088 If the SD card is locked while there is a continuous recording ongoing and then the recording is stopped while the card is still locked, the recording continues and can’t be stopped

5.40.13.2:L35498 It is not possible to select starting point when playing back a recording while using multicast and h264.

5.40.13.2:L36893  Date & Time gets defaulted when preforming a Factory Restore.

5.40.13.2:L37580 The Axis Video Motion Detection application will trigger a motion event if the camera performs any PTZ movements.

5.40.13.2:L37792 Event trigger data is sent even though user data is disabled

5.40.13.2:L38434 For actions based on PTZ events it is  not possible to use the #P (PTZ preset name) and #p (PTZ preset number) modifiers in file names for network share uploads.

5.40.13.2:L38977 Requesting an fps value larger than 30 will always give double the full normal fps for the given video type. Requesting any fps value larger than 30 will thus give 50/60 fps for a PAL/NTSC source.


APPLICATION DEVELOPER Information
=================================

The AXIS VAPIX Application Programming Interface version 3 is supported by this product.
For more information please refer to the AXIS VAPIX HTTP API specification 
version 3 part of the AXIS VAPIX API available at www.axis.com.


Supported AXIS VAPIX API Image Resolutions

Resolution  Exceptions
==========  ==========
D1
720x576     1)
720x480        2)
4CIF
704x576     1)
704x480        2)
2CIF
704x288     1)
704x240        2)
CIF
352x288     1)
352x240        2)
QCIF
176x144     1)
176x120        2)

1) Only available for PAL  cameras
2) Only available for NTSC cameras