FIRMWARE RELEASE NOTES ====================== Products affected: AXIS A1001 Release date: 2017-03-30 Release type: Production Firmware version: 1.57.0.1 File name: A1001_1_58_0.bin Preceding release: 1.57.0 AMC version: None Onvif support: Profile C ------------------------------------------------------------------------------ UPGRADE INSTRUCTIONS ==================== Upgrade the firmware with AXIS Camera Management, HTTP, or FTP. Follow the instructions given in the User Manual, at http://www.axis.com/support/tecnical-notes/how-to-upgrade, or howtoupgrade.txt, which is included in the firmware folder. New Features ============ Corrections in 1.57.0.1 since 1.57.0 ================================= 1.57.0.1:C1 If a door is opened just after REX without unlock is pressed, this triggers DoorForcedOpen event. 1.57.0.1:C2 The Daylight Savings time setting does not change the time in the Event Log in AEM. 1.57.0.1:C3 Event Log Service cannot be updated and a 3rd party client cannot fetch events. Known Bugs/Limitations ====================== 1.57.0.1:L01 It's possible to set faulty IP addresses as proxy under AVHS settings. 1.57.0.1:L03 When removing a group with a large amount of credentials being members of it, the deletion may sometimes fail and needs to be repeated. 1.57.0.1:L04 After a firmware update, the web browser cache may need to be cleared to avoid seeing pages originating from the old firmware. 1.57.0.1:L05 Specifying an IdPoint timeout value (waiting for PIN to be entered) greater than 10 seconds has no effect. 1.57.0.1:L11 In Entry Manager Date & Time Settings you can only input the IP address of the ntp server, not the DNS name. DNS name of NTP server can be provided by going into Additional Controller Configuration > System Options > TCP/IP > Advanced > NTP Configuration. 1.57.0.1:L12 Changing the Time Zone will not work from ACS and ACM. 1.57.0.1:L14 During start up of the device the web server is reachable earier than in previous FW, before other sub-systems are operational, possibly resulting in AEM showing 'Failed to retrieve device info' on its overview page if accessed during this time. Reloading the page a few seconds later will resolve this issue. 1.57.0.1:L15 When Global Events is enabled, then action rules with additional conditions does not work and action rules with the schedule set to something other than Always will not work. 1.57.0.1:L17 If you have offline controllers in a controller cluster and try to remove one of the units that is online this requires a majority of all controllers being online excluding the controller being removed. 1.57.0.1:L19 To change the recipient of an Action Rule, please click the "Modify..." button and change there. The drop-down in the Action Rule lists currently does not work. 1.57.0.1:L23 If you have a door configured with a door monitor, the lock button in AEM will not immediately lock the door. It will only set the controller in a locking state. The door lock will be locked once the door monitor indicates that the door is closed. 1.57.0.1:L25 A schedule with a duration shorter or equal to one hour does not show its end time when viewed in "Show in calendar when the schedule applies". 1.57.0.1:L41 If using a controller cluster and configuring an action rule on one of the devices to trigger on an event sent by another device in the cluster, the action rule will not be triggered.