AXIS Visitor Entry for Genetec
- Create QR codes for instant access
- Convenient, cost-effective, and easy-to-use
- Ideal for today’s mobile-enabled society
- Part of several QR code entry solutions
Generate and use QR codes to streamline the management of visitor entry directly in Genetec. Operators can create and share QR codes as credentials to grant secure, efficient, and convenient access to visitors, employees, and others.
QR Code is a registered trademark of Denso Wave Incorporated in Japan and other countries.
QR code entry system options from Axis and Genetec
AXIS Visitor Entry for Genetec is just one part of several Axis and Genetec end-to-end QR code entry solutions. This integration includes:
A: AXIS Visitor Entry for Genetec
B: AXIS Barcode Reader
1. Access management: Genetec Synergis and Cardholder Management
2. QR code generation and distribution: AXIS Visitor Entry for Genetec
3. Visitor uses QR code
4. Read QR code via AXIS Barcode Reader embedded in supported Axis devices:
- Any Axis intercom
- Select Axis fixed box cameras
- Select Axis modular cameras
Yellow line: TCP/IP
Black line: OSDP/Wiegand
5. Entry decision:
- AXIS A1601 network door controller
- Genetec and other third-party door controllers
6. Open door: any door lock
Reliable and convenient access control
QR codes are becoming the most popular credential type in our mobile-enabled society. Compared to traditional access cards, they offer a secure, cost-efficient, convenient, and sustainable way of managing your access control system. AXIS Visitor Entry for Genetec streamlines the management of identification credentials — eliminating numerous manual tasks related to handling, printing, distributing, and disposing of physical identity badges. Instead, operators can quickly create and share QR codes with visitors who simply present them to a device upon entry. Supported devices from Axis include a broad range of network intercoms, modular cameras and outdoor cameras embedded with AXIS Barcode Reader, which allows them to also function as QR code readers.
Create and share credentials
AXIS Visitor Entry for Genetec provides unique QR codes that grant visitors access to specific doors or site areas for any given time period as setup within Genetec Synergis™ 10.9.1037.0 or later. The operator first registers the visitor’s profile and entry details in Genetec Cardholder Management. After this, they can send the QR code to the visitor via email.
Easy access for visitors
When the visitor arrives, they present their QR code to the Axis intercom or camera embedded with Axis Barcode Reader. The credential’s data is sent to the access control door controller to determine access rights. Once validated, the door controller communicates its entry decision to a door lock which unlocks the door. Up to five locks can be connected wirelessly via a single AXIS A1601 Network Door Controller.
